Upisao FTN mašinski odsek 1995. godine, diplomirao oktobra 2000. godine sa prosečnom ocenom 9,64 i ocenom diplomskog rada 10. Iste godine upisao postdiplomske studije na Smeru za mehaničke prenosnike, teoriju mehanizama i mašina. Na Fakultetu tehničkih nauka Univerziteta u Novom Sadu zaposlen od 15.02.2001.
Maja 2007. godine na Fakultetu tehničkih nauka Univerziteta u Novom Sadu odbranio je magistarsku tezu pod nazivom „Istraživanje konstrukcionih mogućnosti smanjenja otkaza univerzalnih zupčastih reduktora“.
Jula 2013. godine na Fakultetu tehničkih nauka Univerziteta u Novom Sadu odbranio je doktorsku disertaciju pod nazivom „Koncepcije razvoja univerzalnih zupčastih reduktora“.
Avgusta 2014. godine na Mašinskom fakultetu Slovačkog tehničkog univerziteta u Bratislavi odbranio je još jednu doktorsku disertaciju pod nazivom „Optimization of HCR Gearing Geometry from Scuffing Point of View“.
Milan Rackov je lokalni koordinator međunarodnog projekta CEEPUS III „Development of mechanical engineering (design, technology and production management) as an essential base for progress in the area of small and medium companies’ logistics - research, preparation and implementation of joint programs of study“, kao i učesnik ostalih CEEPUS III projekata i Tempus projekta 530577-TEMPUS-1-2012-1-RS-TEMPUS-JPCR „Improvement of Product Development Studies in Serbia and Bosnia and Herzegovina“.
Član je asocijacije ADEKO - Asocijacija za dizajn, elemente i konstrukcije.
(M14) Monografska studija/poglavlje u knjizi M12 ili rad u tematskom zborniku međunarodnog značaja
Rackov M., Vereš M., Kanović Ž., Kuzmanović S.: HCR Gearing and Optimization of Its Geometry, In:Subic, A. (Ed.) Advances in Engineering Materials, Product and Systems Design, Zurich, Trans Tech Publications Inc., 2013, str. 117-132, ISBN 978-3-03785-585-0
(M14) Monografska studija/poglavlje u knjizi M12 ili rad u tematskom zborniku međunarodnog značaja
Kanović Ž., Rapaić M., Jeličić Z., Rackov M., Kapetina M., Atanacković-Jeličić J.: The Generalized Particle Swarm Optimization Algorithm with Aplication Examples. In: WenJun Zhang (Ed.), Self Organization – Theories and Methods, New York, Nova Publishers, 2013, str. 81-108, ISBN 978-1-62618-917-1
(M22) Rad u istaknutom međunarodnom časopisu
Banić, Milan S., Stamenković, Dušan S., Miltenović, Vojislav, Milošević, Miloš S., Miltenović, Aleksandar V., Đekić, Petar S., Rackov, Milan J.: Prediction of heat generation in rubber or rubber-metal springs, Thermal Science, 2012, Vol.16, Suppl. 2, pp.S593-S606, DOI:10.2298/TSCI120503189B
(M22) Rad u istaknutom međunarodnom časopisu
Miltenović, V. A., Kuzmanović, B. S., Miltenović, Đ. V., Tica, M. M., Rackov, J. M.: Thermal stability of crossed helical gears with wheels made from sintered steel, Thermal Science, 2012, Vol. 16, Suppl. 2, pp. S607-S619, doi:10.2298/TSCI120503190M
(M23) Rad u međunarodnom časopisu
Rackov M., Milovančević M., Kanović Ž., Vereš M., Rafa K., Banić M., Miltenović A.: Optimization of HCR Gearing Geometry Using Generalized Particle Swarm Optimization Algorithm, Tehnicki vjesnik - Technical Gazette, 2014, Vol. 21, No 4(2014), pp. 723-732, ISSN 1330-3651, UDK: 681.833.1:519.254
(M23) Rad u međunarodnom časopisu
Kuzmanović S., Vereš M., Rackov M.: Possible Ways of Reducing the Number of Gears in Universal Gear Units, Transactions of FAMENA, Zagreb, 2014, Vol. 38, No 1, pp. 77-86, ISSN 1333-1124
(M23) Rad u međunarodnom časopisu
Rackov, M., Kuzmanović, S., Anišić, Z.: Selecting the Size of the Universal Reducer, Taking into the Account its Thermal Load Capacity, Tehnicki vjesnik - Technical Gazette, 2018, Vol. 25, No 6(2018), pp. 1829-1836, ISSN 1330-3651, Online: ISSN 1848-6339, UDK: 681.833.1:519.254, DOI: 10.17559/TV-20170329230603
(M23) Rad u međunarodnom časopisu
Banjanin, B., Vladić, G., Pal, M., Baloš, S., Dramićanin, M., Rackov, M., Knežević, I., Consistency analysis of mechanical properties of elements produced by FDM additive manufacturing technology, Revista Materia, Vol.23,
No.4, ISSN 1517-7076, doi: 10.1590/S1517-707620180004.0584
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Rackov M., Čavić M., Penčić M., Knežević I., Vereš M., Tica M.: Reducing of Scuffing Phenomenon at HCR Spur Gearing, 5. International Conference on Advanced Manufacturing Engineering and Technologies - NEWTECH, Beograd: Springer, 5-9 Jun, 2017, pp. 141-155, ISBN 978-3-319-56429-6, UDK: DOI: 10.1007/978-3-319-56430-2_10
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Kuzmanović S., Rackov M., Knežević I.: Mechanical Gear Transmissions Nowdays, 5. International Conference on Power Transmissions, Ohrid: Faculty of Mechanical Engineering, 5-8 Oktobar, 2016, pp. 39-46, ISBN 978-608-4624-25-7
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Rackov M., Kanović Ž., Čavić M., Penčić M., Kuzmanović S., Knežević I., Vereš M.: Adopting Suitable HCR Tooth Flank Geometry in Order to Increase the Resistance of Scuffing, 5. International Conference on Power Transmissions, Ohrid: Faculty of Mechanical Engineering, 5-8 Oktobar, 2016, pp. 47-54, ISBN 978-608-4624-25-7
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Kuzmanović S., Rackov M., Vereš M.: Analysis of Requirements Corresponding to Development of Modern Products, 4. International Scientific Conference on Advances in Mechanical Engineering - ISCAME, Debrecen: University of Debrecen, Faculty of Engineering, Department of Mechanical Engineering, Debrecen, Hungary, 13-15 Oktobar, 2016, pp. 293-301, ISBN 978-963-473-944-9
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Rackov M., Kuzmanović S., Čavić M., Penčić M., Knežević I.: Influence of Operating and Ambient Temperature on Load Capacity of Universal Worm Gear Reducer, 13. International Conference on Accomplishments in Mechanical and Industrial Engineering - DEMI, Banja Luka: Faculty of Mechanical Engineering in Banja Luka, 26-27 Maj, 2017, pp. 533-538, ISBN 978-99938-39-72-9
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Kuzmanović S., Rackov M., Knežević I.: Analysis of Selection Procedures of Universal Worm Gear Units, 9. The 9th International Symposium - KOD 2016 - Machine and Industrial Design in Mechanical Engineering, Balatonfured: University of Novi Sad, Faculty of Technical Sciences, Serbia / Slovak University of Technology in Bratislava, Faculty of Mechanical Engineering, Slovakia, 9-12 Jun, 2016, pp. 73-78, ISBN 978-86-7892-821-5
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Rackov M., Knežević I., Kuzmanović S., Čavić M., Penčić M., Ianici S.: Proposal of Assessment Method of Different Quality Solutions of Universal Gear Reducers, 3. International Scientific Conference "Conference on Mechanical Engineering Technologies and Applications" - COMETa, Jahorina: Faculty of Mechanical Engineering in East Sarajevo, 7-9 Decembar, 2016, pp. 301-308, ISBN 978-99976-623-7-8
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Alexa, V., Kiss, I., Rackov, M., Kuzmanović, S.: Study on the Advance and Delay Phenomenon’s in the Asymmetric Longitudinal Rolling Process, 7. Simpozijum o konstruisanju, oblikovanju i dizajnu – KOD, Balatonfured: University of Novi Sad, Faculty of Technical Sciences, Serbia / Slovak University of Technology in Bratislava, Faculty of Mechanical Engineering, Slovakia, 24-26 May, 2012, pp. 415-420, ISBN 978-86-7892-399-9
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Vereš, M., Kuzmanović, S., Rackov, M.: Experimental Research of HCR Gearing From Pitting Damage Point of View, 7. Simpozijum o konstruisanju, oblikovanju i dizajnu – KOD, Balatonfured: University of Novi Sad, Faculty of Technical Sciences, Serbia / Slovak University of Technology in Bratislava, Faculty of Mechanical Engineering, Slovakia, 24-26 May, 2012, pp. 317-320, ISBN 978-86-7892-399-9
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Kuzmanović, S., Mitrović, R., Rackov, M., Miltenović, Đ.: Evaluation and Choice of Conceptual Solutions for a Universal Motor Gear Reducer, The 4th Power Transmissions, Sinaia: University Politehnica of Bucharest, The Faculty of Mechanical Engineering and Mechatronics, 20-23 June, 2012
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Rackov, M., Trbojević, R., Kuzmanović, S.: Influence of Gear Helix Angle on Axial Loading Capacity of Output Shaft of Helical Gear Units, 8th International Symposium on Interdisciplinary Regional Research, Hungary-Romania-Serbia & Montenegro, Szeged Regional Committee of the Hungarian Academy of Sciences, Szeged, April 19-21, 2005, Section 3, No. TSP13
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Kuzmanović, S., Rackov, M.: Service Life of Universal Gear Reducers, 22. DAAAM International Symposium, Vienna: DAAAM International Vienna, International Academy of Engineering, Vienna University of Technology, University of Applied Sciences, Technikum Vienna and Austrian Society of Engineers and Architects - Öiav 1848, Editor: B.[Ranko] Katalinic, 23-26 Novembar, 2011, pp.1097-1098, ISBN 1726-9679679
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Kuzmanović, S., Rackov, M.: Evaluation of Conceptual Solutions of Universal Helical Two Stage Gear Units, 10. International Conference on Accomplishments in Electrical and Mechanical Engineering and Information Technology - DEMI, Banja Luka: University of Banja Luka, Faculty of Mechanical Engineering, 26-28 May, 2011, pp. 151-158, ISBN 978-99938-39-36-1
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Barišić, B., Kuzmanović, S., Rackov, M.: Effect of External Loads at the Output Shaft End of Universal Worm Gear Reducer on Its Thermal Capacity, 7. IRMES-Naučno-stručni skup Istraživanje i razvoj mašinskih elemenata i sistema, Zlatibor: University of Niš, Mechanical Engineering Faculty, 27-28 April, 2011, pp. 535-540, ISBN 978-86-6055-012-7
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Rackov, M., Kuzmanović, S.: Proposal of Assessment Method for the Conceptual Design of Universal Helical Gear Reducers, 7. IRMES-Naučno-stručni skup Istraživanje i razvoj mašinskih elemenata i sistema, Zlatibor: University of Niš, Mechanical Engineering Faculty, 27-28 April, 2011, pp. 469-474, ISBN 978-86-6055-012-7
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Kuzmanović, S., Rackov, M.: Directions of Development of Universal Speed Reducers, 1. General Machine Design, Rousse: University of Ruse "Angel Kanchev", 15-16 Oktober, 2009, pp. 31-34, ISBN ISSN 1313-9193
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Kuzmanović, S., Rackov, M.: Analysis of Influence of Axial Load of Output Shaft of Universal Motor Gear Reducer on Their Operating Life, 6. Simpozijum o konstruisanju, oblikovanju i dizajnu – KOD, Palić: Fakultet tehničkih nauka, Novi Sad, 29-30 Septembar, 2010, pp. 159-162, ISBN 978-86-7892-278-7
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Kuzmanović, S., Mitrović, R., Rackov, M., Miltenović, Đ.: Evaluation and Choice of Conceptual Solutions for a Universal Motor Gear Reducer, The 4th Conference Power Transmissions, 20-23 June, 2012, Sinaia, University Politehnica of Bucharest, The Faculty of Mechanical Engineering and Mechatronics
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Kuzmanović, S., Rackov, M.: Development Tendencies of Universal Gear Reducers, The 3rd Conference of Power Transmissions, Kallithea: Balkan Association for Power Transmissions, 1 Oktober, 2009, pp. 145-148, ISBN 978-960-243-662-2
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Kuzmanović, S., Rackov, M.: Design Analysis of Housings of Universal Multistage Helical Motor Gear Units, 5. International Symposium on Graphic Engineering and Design, GRID, Novi Sad: Faculty of Technical Sciences, Novi Sad, 11-12 November, 2010, pp. 255-260, ISBN 978-86-7892-294-7
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Kuzmanović, S., Vereš, M., Rackov, M.: Product Design as the Key Factor for Development in Mechanical Engineering, 1. Mechanical Engineering in XXI Century, Niš: Mašinski fakultet u Nišu, 25-26 November, 2010, pp. 113-116, ISBN 978-86-6055-008-0
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Rackov, M., Kuzmanović, S.: Analysis of the Most Common Failures of Gears in Universal Gear Reducers, 10. International Symposium on Interdisciplinary Regional Research - ISIRR, Hunedoara: ISIRR, 23-24 April, 2009, pp. 1-8
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Kuzmanović, S., Vereš, M., Rackov, M., Trbojević, R.: Possibilities of Modern Monitoring Universal Gear Reducers, 5. International Symposium about forming and design in mechanical engineering KOD, Novi Sad: Faculty of Technical Sciences, Novi Sad, 15-16 April, 2008, pp. 339-342, ISBN 978-86-7892-104-9
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Rackov, M., Kuzmanović, S., Trbojević, R.: Assessment of Service Life of Universal Motor Gear Reducers, The 2nd Conference of Power Transmissions, Novi Sad, Faculty of Technical Sciences, 25-26 April, 2006, pp. 505-508, ISBN 86-85211-78-6
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Kuzmanović, S., Trbojević, R., Rackov, M.: Influence of Teeth Parameters on Stiffness of Gear Pair, 9. Mechanical Engineering (Strojné inžinierstvo), Bratislava: Faculty of Mechanical Engineering, Slovak University of Technology in Bratislava, 16 November, 2005, pp. 896-901, ISBN 80-227-2314-2
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Krajcovic A., Vereš M., Rackov M., Kuzmanović S.: Contribution to the Study of HCR Gearing Properties From Warm Scuffing Damage Point of View, 8. The Eighth International Symposium - KOD 2014 - Machine and Industrial Design in Mechanical Engineering, Balatonfured: University of Novi Sad, Faculty of Technical Sciences, Serbia / Slovak University of Technology in Bratislava, Faculty of Mechanical Engineering, Slovakia, 12-15 Jun, 2014, pp. 171-176, ISBN 978-86-7892-615-0
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Kuzmanović S., Rackov M., Knežević I., Rafa K., Tica M.: Possibilities of Increasing Efficiency of Mechanical Transmissions, 8. The Eighth International Symposium - KOD 2014 - Machine and Industrial Design in Mechanical Engineering, Balatonfured: University of Novi Sad, Faculty of Technical Sciences, Serbia / Slovak University of Technology in Bratislava, Faculty of Mechanical Engineering, Slovakia, 12-15 Jun, 2014, pp. 207-210, ISBN 978-86-7892-615-0
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Kuzmanović S., Vladić G., Rackov M.: NEW AND CREATIVE PRODUCT IDEA GENERATION, ASSOCIATION METHOD, 7. INTERNATIONAL Symposium on Graphic Engineering and Design GRID, Novi Sad: FACULTY OF TECHNICAL SCIENCES DEPARTMENT OF GRAPHIC ENGINEERING AND DESIGN, 13-14 Novembar, 2014, pp. 467-471, ISBN 78-86-7892-645-7
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Rafa K., Rackov M., Knežević I.: Improvement of Business Processes in Production System Concerning Repair and Installation of Brake Systems for Rail Vehicles, 16. International Scientific Conference on INDUSTRIAL SYSTEMS - IS, Novi Sad: University of Novi Sad, Faculty of Technical Sciences, Department for Industrial Engineering and Management, 15-17 Oktobar, 2014, pp. 41-44, ISBN 978-86-7892-652-5
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Kuzmanović S., Rackov M., Vereš M.: Osnovne odlike savremenih bezazornih prenosnika, 2. International Scientific Conference "Conference on Mechanical Engineering Technologies and Applications" - COMETa, Jahorina: University of East Sarajevo, Faculty of Mechanical Engineering, East Sarajevo, 2-5 Decembar, 2014, pp. 443-450, ISBN 978-99976-623-1-6
(M33) Saopštenje sa međunarodnog skupa štampano u celini
M. Rackov, S. Kuzmanović, R. Trbojević: ASSESSMENT OF SERVICE LIFE OF UNIVERSAL MOTOR GEAR REDUCERS, Rad je saopšten na 2nd International conference „Power Transmissions 2006“, 25. i 26. aprila 2006. u Novom Sadu, štampan u zborniku radova Proceedings, str. 505-508, i objavljen na CD-u konferencije
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Kuzmanović S., Rackov M., Rafa K., Tica M.: Analysis of Existing Calculation Methods for Group Bolted Joints Loaded by a Moment Perpendicular to the Joint Plane, 2. MECHANICAL ENGINEERING IN XXI CENTURY, Niš: University of Niš, Faculty of Mechanical Engineering, 20-21 Jun, 2013, pp. 205-208, ISBN 978-86-6055-039-4
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Vereš M., Kanović Ž., Rackov M.: HCR Gearing Geometry Optimization by using of Generalized Particle Swarm Algorithm, 54. International Conference of Machine Design Departments, Liberec, 12 Septembar, 2013, pp. 451-456, ISBN 978-80-7372-986-8
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Čavić M., Penčić M., Rackov M., Knežević I., Zlokolica M.: Dynamic Optimization of the Cam-Lever Mechanism for Thermoforming Machine Tool Driving, 5. International Conference on Advanced Manufacturing Engineering and Technologies - NEWTECH, Beograd: Springer, 5-9 Jun, 2017, pp. 185-198, ISBN 978-3-319-56429-6, UDK: DOI: 10.1007/978-3-319-56430-2_13
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Penčić M., Čavić M., Rackov M., Borovac B., Knežević I., Zlokolica M.: Kinematic Analysis of the Robot Eyes Drive System with 7 DOFs, 8. PSU-UNS International Conference on Engineering and Technology - ICET, Novi Sad: Faculty of Technical Sciences in Novi Sad, 8-10 Jun, 2017, pp. 1-5, ISBN 978-86-7892-934-2
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Knežević I., Čavić M., Bojić S., Rackov M., Penčić M., Surčinski J., Zlokolica M.: Optimal Design of the Mechanism for Configuration Change of the Seedbed Cultivator, 8. PSU-UNS International Conference on Engineering and Technology - ICET, Novi Sad: Faculty of Technical Sciences in Novi Sad, 8-10 Jun, 2017, pp. 1-5, ISBN 978-86-7892-934-2
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Ivanović L., Marković B., Arsovski S., Rackov M., Kuzmanović S.: Emotional Design and Quality of Life, 2. International Conference on Quality of Life, Kragujevac: Center for Quality, Faculty of Engineering, University of Kragujevac, 8-10 Jun, 2017, pp. 87-94, ISBN 978-86-6335-043-4
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Čavić M., Penčić M., Rackov M., Zlokolica M.: Dynamic Optimization of the Pulse Continuously Variable Transmission, 5. International Conference on Power Transmissions, Ohrid: Faculty of Mechanical Engineering in Skopje, 5-8 Oktobar, 2016, pp. 123-131, ISBN 978-608-4624-25-7
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Penčić M., Čavić M., Rackov M., Borovac B., Lu Z.: Optimization of Planetary Gear Trains with Spur, Helical and Double Helical Gears, 8. International Scientific and Expert Conference (TEAM), Trnava: Faculty of Materials Science and Technology in Trnava, 19-21 Oktobar, 2016, pp. 29-34, ISBN 978-80-8096-237-1
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Čavić M., Penčić M., Rackov M., Knežević I., Zlokolica M.: Dynamic Analysis of the Thermoforming Machine Working Mechanism, 3. International Scientific Conference "Conference on Mechanical Engineering Technologies and Applications" - COMETa, Jahorina: Faculty of Mechanical Engineering in East Sarajevo, 7-9 Decembar, 2016, pp. 177-184, ISBN 978-99976-623-7-8
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Miltenović A., Banić M., Miltenović V., Rackov M., Bucha J.: Prediction of heat generation in meshing of HRC gears, 6. International Conference on Gears, Minhen: VDI-Society for Product and Process Design, 5-7 Oktobar, 2015, pp. 871-882, ISBN 978-3-18-092255-3
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Vereš M., Kožuch I., Rackov M., Kuzmanović S.: Contribution to Solving the Non-Involute Gearing Profiles Production, 3. International Conference Mechanical Engineering in XXI Century, Niš: Mašinski fakultet Univerziteta u Nišu, 17-18 Septembar, 2015, pp. 161-166, ISBN 978-86-6055-072-1
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Kuzmanović S., Rackov M., Vereš M.: Analysis of Application of Universal Shaft-Mounted Gear Reducer, 3. International Conference Mechanical Engineering in XXI Century, Niš: Mašinski fakultet Univerziteta u Nišu, 17-18 Septembar, 2015, pp. 183-186, ISBN 978-86-605-5-072-1
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Kuzmanović S., Rackov M., Knežević I., Rafa K., Tica M.: Possibilities of Increasing Efficiency of Mechanical Transmissions, 8. International Symposium - KOD - Machine and Industrial Design in Mechanical Engineering, Balatonfured: University of Novi Sad, Faculty of Technical Sciences, Serbia / Slovak University of Technology in Bratislava, Faculty of Mechanical Engineering, Slovakia, 12-15 Jun, 2014, pp. 207-210, ISBN 978-86-7892-615-0
(M42) Monografija nacionalnog značaja, monografsko izdanje građe,
Kuzmanović, S., Rackov, M.: Bezazorni prenosnici u vojnom mašinstvu, Vojnotehnički institut, Beograd, 2012, str.101, ISBN 978-86-81123-51-5
(M45) Poglavlje u knjizi M42 ili rad u tematskom zborniku nacionalnog značaja
Kuzmanović, S., Rackov, M.: Globalization Influence on Product Assortment and Process of Product Development, Poznan University of Technology, Poznan, Poland, 2006, str. 323-330, ISBN 83-89873-28-1
(M45) Poglavlje u knjizi M42 ili rad u tematskom zborniku nacionalnog značaja
Kuzmanović, S., Rackov, M., Vereš, M.: Product Lifetime, Slovak University of Technology in Bratislava, Faculty of Mechanical Engineering, Bratislava, 2009, str.135-144, ISBN 978-80-227-3326-7
(M45) Poglavlje u knjizi M42 ili rad u tematskom zborniku nacionalnog značaja
Vereš, M., Harman, B., Kuzmanović, S., Rackov, M.: Determination of the Correct Mating Cylindrical Teeth Flanks Profiles When the Path of Contact is Given, Slovak University of Technology in Bratislava, Faculty of Mechanical Engineering, Bratislava, 2009, str. 145-151, ISBN 978-80-227-3326-7
(M45) Poglavlje u knjizi M42 ili rad u tematskom zborniku nacionalnog značaja
Menadžment životnim ciklusom proizvoda / [autori Siniša Kuzmanović, Milan Rackov, Biljana Marković, Milan Banić, Aleksandar Miltenović, Zoran Anišić, Duško Pavletić, Tonči Mikac, Milan Ikonić, Milovan Lazarević, Ilija Ćosić] ; priređivači Siniša Kuzmanović, Milan Ikonić, Zoran Anišić. - Novi Sad : Fakultet tehničkih nauka, 2013 (Novi Sad : FTN, Grafički centar GRID) . - (Edicija "Tehničke nauke - monografije" ; 53), ISBN 978-86-7892-509-2
(M51) Rad u vodećem časopisu nacionalnog značaja
Kanović Ž., Rackov M., Petković M., Vereš M.: GPSO algorithm in HCR gearing geometry optimization, Journal on Processing and Energy in Agriculture, 2015, Vol. 19, No 4, pp. 31-35, ISSN 1821-4487
(M51) Rad u vodećem časopisu nacionalnog značaja
Rackov M., Kuzmanović S., Knežević I., Čavić M., Penčić M.: Analysis of Justification for Applying Two Gear Sets within the Universal Gear Reducers, MATEC Web of Conferences, 2017, Vol. 121, pp. 10131-10138, ISSN 2261-236X, UDK: DOI: 10.1051/matecconf/201712108005
(M51) Rad u vodećem časopisu nacionalnog značaja
Penčić M., Čavić M., Savić S., Rackov M., Borovac B., Lu Z.: Assistive Humanoid Robot MARKO: Development of the Neck Mechanism, MATEC Web of Conferences, 2017, Vol. 121, pp. 1-8, ISSN 2261-236X, UDK: DOI: 10.1051/matecconf/201712108005
(M51) Rad u vodećem časopisu nacionalnog značaja
Krajcovic A., Vereš M., Rackov M., Kuzmanović S.: Contribution to the Study of HCR Gearing Properties From Warm Scuffing Damage Point of View, Machine Design, 2014, Vol. 6, No 4, pp. 121-126, ISSN 1821-1259
(M51) Rad u vodećem časopisu nacionalnog značaja
Kuzmanović, S., Rackov, M., Rafa, K.: Benefits of the Application of Cycloidal Backlash Gear Reducers With More Eccentric Shafts, Balkan Journal of Mechanical Transmissions - BJMT, 2012, Vol. 2, No.1, pp. 33-38, ISSN 2069-5497
(M51) Rad u vodećem časopisu nacionalnog značaja
Rackov, M., Kuzmanović, S.: Proposal of Assessment Method for the Conceptual Design of Universal Helical Gear Reducers, Balkan Journal of Mechanical Transmissions - BJMT, 2011, Vol. 1, No.2, pp.69-75, ISSN 2069-5497
(M51) Rad u vodećem časopisu nacionalnog značaja
Kuzmanović, S., Rackov, M., Vereš, M.: Testing of Universal Gear Reducers, Budowa Maszyn i Zarzadzanie Produkcja, 2008, No.8, pp.51-56, ISSN 1733-1919
(M51) Rad u vodećem časopisu nacionalnog značaja
Rackov, M., Trbojević, R., Kuzmanović, S.: Analiza opravdanosti primene zupčanika sa različitim nosivostima u okviru univerzalnih zupčastih reduktora / Justification Analysis of Application of Gears With Different Load Capacity for Universal Spur Gear Units, Konstruisanje mašina / Journal of Mechanical Engineering Design, Vol. 8, No.1-2005, str. 32 - 35, ISSN 1450-5401
(M51) Rad u vodećem časopisu nacionalnog značaja
Kuzmanović, S., Rackov, M.: Usual Possibile Ways of Increasing of Speed Rations Values of Universal Gear Reducers, Acta Technica Napocensis - Applied Mathematics and Mechanics, 2009, No.52, pp.221-226, ISSN 1221-5872
(M51) Rad u vodećem časopisu nacionalnog značaja
Kuzmanović, S., Vereš, M., Rackov, M.: Analysis of Characteristical Mounting Ways of Gear Wheels In Universal Gear Reducers, Budowa Maszyn i Zarzadzanie Produkcja, 2009, No.11, pp.81-90, ISSN 1733-1919
(M51) Rad u vodećem časopisu nacionalnog značaja
Kuzmanović, S., Ianici, S., Rackov, M.: Life Cycle Influence on the Policy of Product Development, Annals of the Oradea University - Fascicle of Management and Technological Engineering, 2009, Tome VII, pp.754-761, ISSN 1583–0691
(M51) Rad u vodećem časopisu nacionalnog značaja
Rackov, M., Kuzmanović, S.: Analysis of the Most Common Failures of Gears in Universal Gear Reducers, Annals of Faculty Engineering Hunedoara - International Journal of Engineering, 2009, Vol. 7, No.4, pp.67-74, ISSN 1584-2665
(M51) Rad u vodećem časopisu nacionalnog značaja
Kuzmanović, S., Rackov, M.: Factors That Influence on Product Lifetime, Annals of Faculty Engineering Hunedoara - International Journal of Engineering, 2010, No.2010-2, pp.239-244, ISSN 1584-2665
(M53) Rad u naučnom časopisu
Kuzmanović, S., Trbojević, R., Rackov, M.: Analiza uticaja međuosnog rastojanja na veličinu najvećeg prenosnog odnosa zupčastog reduktora, TEHNIKA 2001, No.2, str. M9-12, ISSN 0040-2176
(M53) Rad u naučnom časopisu
Vereš, M., Bošanský, M., Rackov, M.: Theoretical and Experimental Research of the HCR Gear’s Contact Strength, Machine Design, 2011, Vol.3, No.2, pp. 105-108, ISSN 1821-1259
(M53) Rad u naučnom časopisu
Kuzmanović, S., Lucian, T., Rackov, M.: Ispitivanje univerzalnih reduktora tokom eksploatacije / Testing of Universal Gear Reducers During the Exploitation, Konstruisanje mašina / Journal of Mechanical Engineering Design, 2008, Vol.11, No.1, pp.45-52, ISSN 1450-5401
(U01) Osnovni udžbenik za nastavni predmet
Inženjerske grafičke komunikacije / Zoran Milojević, Milan Rackov, Ivan Knežević, Mirjana Bojanić - 1. izd. - Novi Sad : Fakultet tehničkih nauka, 2017 (Novi Sad : FTN, Grafički centar GRID) . - (Edicija "Tehničke nauke - udžbenici" ; 611), ISBN 978-86-7892-887-1
(U01) Osnovni udžbenik za nastavni predmet
Specijalni mašinski elementi poljoprivrednih mašina / Siniša Kuzmanović, Milan Rackov, Maja Čavić, Milan Kostić. - Novi Sad : Univerzitet u Novom Sadu, 2015 (Petrovaradin : Futura), ISBN 978-86-499-0198-8
(U01) Osnovni udžbenik za nastavni predmet
Industrijski dizajn / Lozica Ivanović, Simiša Kuzmanović, Miroslav Vereš, Milan Rackov, Biljana Marković, Vojislav Miltenović. - Kragujevac : Fakultet inženjerskih
nauka, 2015 (Kragujevac : Interprint), ISBN 978-86-6335-017-5
(U02) Pomoćni udžbenik za nastavni predmet
Izrada konstrukcione dokumentacije / Zoran Milojević, Milan Rackov, Siniša Kuzmanović, Ivan Knežević, . - Novi Sad : Univerzitet u Novom Sadu, 2015 (Petrovaradin : Futura), ISBN 978-86-499-0198-8
(U02) Pomoćni udžbenik za nastavni predmet
Kuzmanović, S., Trbojević, R., Rackov, M.: Zbirka zadataka iz mašinskih elemenata, Fakultet tehničkih nauka, Novi Sad, 2016, str.198, ISBN 978-86-7892-836-9
(U02) Pomoćni udžbenik za nastavni predmet
Kuzmanović, S., Trbojević, R., Rackov, M.: Zbirka zadataka iz mašinskih elemenata, Fakultet tehničkih nauka, Novi Sad, 2009, str.198, ISBN 978-86-7892-154-4
(U02) Pomoćni udžbenik za nastavni predmet
Kuzmanović, S., Trbojević, R., Rackov, M.: Zbirka zadataka iz mašinskih elemenata, Fakultet tehničkih nauka, Novi Sad, 2003, str.198, ISBN 978-86-80249-68-8
(U02) Pomoćni udžbenik za nastavni predmet
Mašinski elementi - priručnik / Biljana Marković, Mirko Blagojević, Zorica Đorđević, Milan Rackov, Žarko Mišković, Aleksandar Košarac. - Istočno Sarajevo: Univerzitet u Istočnom Sarajevu, Mašinski fakultet, 2015 (Banja Luka: Comesgrafika d.o.o.), ISBN 978-99976-623-4-7
