1996-1999 Viša tehnička škola, Novi Sad-zvanje Grafički inženjer
1999 Štamparija „Lito studio“ zaposlen kao tehnolog (9 meseci)
2000 Štamparija „Budućnost“ zaposlen kao tehnolog (9 meseci)
1999-2002 Univerzitet u Novom Sadu, Fakultet tehničkih nauka, Diplomirani grafički inženjer
2001. Demonstrator u okviru vežbanja na predmetima Grafičkog inženjerstva i dizajna, Univerzitet u Novom Sadu, Fakultet tehničkih nauka, Departman za Grafičko inženjerstvo i dizajn
2002 - 2006 Asistenta pripravnik, Univerzitet u Novom Sadu, Fakultet tehničkih nauka, Departman za Grafičko inženjerstvo i dizajn
2003. jun-jul Printpromotion, AZP, Chemnitz, Republika Nemačka-specijalizacija (2 meseca)
2007. Odbrana magistarske teze
2007 - 2012 Asistent, Univerzitet u Novom Sadu, Fakultet tehničkih nauka, Departman za Grafičko inženjerstvo i dizajn
2012. Odbrana doktorske teze
2012 - 2017 Docent, Univerzitet u Novom Sadu, Fakultet tehničkih nauka, Departman za Grafičko inženjerstvo i dizajn
2017 - Vanredni profesor, Univerzitet u Novom Sadu, Fakultet tehničkih nauka, Departman za Grafičko inženjerstvo i dizajn
2022 - Redovni profesor, Univerzitet u Novom Sadu, Fakultet tehničkih nauka, Departman za Grafičko inženjerstvo i dizajn
(M13) Monografska studija/poglavlje u knjizi M11 ili rad u tematskom zborniku vodećeg međunarodnog značaja
Pavlović Ž., Dedijer S., Draganov S., Karlović I., Jurič (Rilovski) I.: Printing on Polymers, chapter Offset Printing, Amsterdam, Elsevier Inc, 2015, pp.. 217-238, ISBN 9780323374682
(M21) Rad u vrhunskom međunarodnom časopisu
Adamović (Majkić) S., Prica M., Dalmacija B., Rapajić S., Novaković D., Pavlović Ž., Maletić S.: Feasibility of electrocoagulation/flotation treatment of waste offset printing developer based on the response surface analysis, Arabian Journal of Chemistry, 2015, ISSN 1878-5352, UDK: DOI: http://dx.doi.org/10.1016/j.arabjc.2015.03.018
(M22) Rad u istaknutom međunarodnom časopisu
Urbas R., Milošević R., Kašiković N., Pavlović Ž., Stankovič Elesini U.: Microcapsules application in graphic arts industry: a review on the state-of-the-art, Iranian Polymer Journal, 2017, Vol. 26, No 7, pp. 541-561, ISSN 1735-5265, UDK: doi:10.1007/s13726-017-0541-1
(M22) Rad u istaknutom međunarodnom časopisu
Risović D., Pavlović Ž.: Performance Assessment of Methods for Estimation of Fractal Dimension From Scanning Electron Microscope Images, Scanning, 2013, Vol. 35, No 6, pp. 402-411, ISSN 0161-0457
(M22) Rad u istaknutom međunarodnom časopisu
Pavlović Ž., Muck T., Hladnik A., Karlović I.: A Comparative Study of Offset Plate Quality Parameters using Image Processing and Analytical Methods, Acta Polytechnica Hungarica, Journal of Applied Sciences, 2012, Vol. 9, No 6, pp. 181-193, ISSN 1785-8860
(M22) Rad u istaknutom međunarodnom časopisu
Pavlović Ž., Novaković D., Cigula T.: Wear analysis of the offset printing plate`s non/printing areas depending on exploitation, Tehnicki vjesnik - Technical Gazette, 2012, Vol. 19, No 3, pp. 479-484, ISSN 1330-3651, UDK: 655.344:620.178.16
(M23) Rad u međunarodnom časopisu
Pavlović Ž., Risović D., Novaković D.: Comparative study of direct and indirect, image-based profilometry in characterization of surface roughness,, Surface and Interface Analysis, 2012, Vol. 44, No 7, pp. 825-830, ISSN 0142-2421, UDK: Online ISSN:1096-9918
(M23) Rad u međunarodnom časopisu
Pavlović Ž., Dedijer S., Kašiković N., Novaković D., Pál (Apro) M., Risović D.: Evaluation of effective models of offset CTP plate aluminium oxide surface roughness characterisation, International Journal of Surface Science and Engineering, 2017, Vol. 11, No 5, pp. 433-449, ISSN 1749-7868
(M23) Rad u međunarodnom časopisu
Spiridonov I., Boeva R., Lozanova-Doncheva I., Bozhkova T., Pavlović Ž., Vladić G., Kašiković N., Stančić M., Tacheva B.: Study of color characteristic changes of printed images under artificial ageing on different papers, Bulgarian Chemical Communications, 2017, Vol. 49, No L, pp. 229-236, ISSN 0324-1130
(M23) Rad u međunarodnom časopisu
Pavlović Ž., Pál (Apro) M., Cigula T., Rumyana B., Boeva R., Spiridonov I., Bozhkova T., Prica M.: Comparative study of offset plate tone value reproduction using different measuring and image processing tools, Bulgarian Chemical Communications, 2017, Vol. 49, No L, pp. 222-228, ISSN 0324-1130
(M23) Rad u međunarodnom časopisu
Boeva R., Spiridonov I., Pavlović Ž., Vladić G.: Investigation of color characteristics changes of semi chemical pulp samples in process of ageing, Bulgarian Chemical Communications, 2017, Vol. 49, No L, pp. 126-129, ISSN 0324-1130
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Pál (Apro) M., Dedijer S., Kašiković N., Vladić G., Novaković D., Pavlović Ž., Banjanin B.: Investigation of adhesive layer thickness distribution of perfect bounded broshures, 11. Innovations in Publishing, Printing and Multimedia Technologies, Kaunas: Kaunas University of Applied Sciences, 19-20 April, 2018, pp. 90-96
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Milošević R., Kašiković N., Pavlović Ž., Stančić M., Urbas R.: Characterization of Coated Prints With Fragranced Microcapsules, 9. INTERNATIONAL Symposium on Graphic Engineering and Design GRID, Novi Sad: Fakultet tehničkih nauka, 8-10 Novembar, 2018, pp. 181-188, ISBN 978-86-6022-115-7
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Dedijer S., Tomić I., Pál (Apro) M., Jurič (Rilovski) I., Pavlović Ž., Milić N.: Repeatability and reproduction accuracy in electrophotography for color difference evaluations, 9. INTERNATIONAL Symposium on Graphic Engineering and Design GRID, Novi Sad: Faculty of Technical Sciences, 8-10 Novembar, 2018, pp. 313-321, ISBN 978-86-6022-115-7
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Milošević R., Kašiković N., Pavlović Ž., Stanković Elesini U., Kukuruzović D., Urbas R.: INFLUENCE OF MICROCAPSULES’ CONCENTRATION ON THE PHYSICAL AND SURFACE CHARACTERISTICS OF THE PRINTS, 2. 2nd International Printing Technologies Symposium – PrintIstanbul 2017, Istanbul: Marmara Üniversitesi, 11-12 October, 2017, pp. 133-142, ISBN 978-9944-0636-7-8
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Kašiković N., Vladić G., Milošević R., Đurđević S., Jurič (Rilovski) I., Novaković D., Pavlović Ž.: RUBBING FASTNESS PROPERTIES OF DIGITAL PRINTED SAMPLES, 2. 2nd International Printing Technologies Symposium – PrintIstanbul 2017, Istanbul: Marmara Üniversitesi, 11-12 October, 2017, pp. 295-393, ISBN 978-9944-0636-7-8
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Tomić I., Dedijer S., Jurič (Rilovski) I., Pál (Apro) M., Pavlović Ž., Vladić G.: Influence of Resolution and Print Settings on Colour Reproduction in Ink-Jet Printing, 2. 2nd International Printing Technologies Symposium – PrintIstanbul 2017, Istanbul: Marmara University, 11-12 October, 2017, pp. 273-282, ISBN 978-9944-0636-7-8
(M33) Saopštenje sa međunarodnog skupa štampano u celini
Dedijer S., Pál (Apro) M., Pavlović Ž., Vladić G., Novaković D.: Possibilites of Flexo Printing Plate Elements Characterisation by Image Processing, 5. International Joint Conference on Environmental and Light Industry Technologies, Budapest: Obuda University, 19-20 Novembar, 2015, pp. 82-91, ISBN 978-615-5460-60-9
(M34) Saopštenje sa međunarodnog skupa štampano u izvodu
Milošević R., Kašiković N., Pavlović Ž., Stanković Elesini U., Cigula T., Urbas R.: Analysis of Coatings With Scented Microcapsules, 1. International Conference on Electron Microscopy of Nanostructures ((ELMINA), Beograd: Serbian Academy of Sciences and Arts, 27-29 Avgust, 2018, pp. 131-133, ISBN 978-86-7025-785-6
(M34) Saopštenje sa međunarodnog skupa štampano u izvodu
Urbas R., Milošević R., Pavlović Ž., Kašiković N., Stankovič Elesini U.: Microcapsule structure and its application in the printing industry, 9. International Engineering Symposium at Banki Budapest, Budimpešta: Óbuda University Donát Bánki Faculty of Mechanical and Safety Engineering, 27 Novembar, 2017, pp. 83-83
(M34) Saopštenje sa međunarodnog skupa štampano u izvodu
Pál (Apro) M., Koltai L., Dedijer S., Kašiković N., Pavlović Ž., Vladić G., Tomić I.: Preliminary analysis of crack distribution for objective fold-crack assessment, 1. IJCELIT 2017 - International Joint Conference on Enviromental and Light Industry Technologies, Budapest: Rejtő Sándor Faculty of Light Industry and Environmental Protection Engineering, 23-24 Novembar, 2017, pp. 27-27, ISBN 978-963-449-061-6
(M34) Saopštenje sa međunarodnog skupa štampano u izvodu
Dedijer S., Pál (Apro) M., Tomić I., Pavlović Ž., Vasić J., Vladić G., Kašiković N.: Study of line and dot elements reproduction on digital flexo printing plates using flexcel nx imaging technology, 1. IJCELIT 2017 - International Joint Conference on Enviromental and Light Industry Technologies, Budapest: Rejtő Sándor Faculty of Light Industry and Environmental Protection Engineering, 23-24 Novembar, 2017, ISBN 978-963-449-061-6
(M71) Odbranjena doktorska disertacija
Pavlović Ž.: Karakterizacija površinske strukture neštampajućih elemenata CtP termalne štamparske forme za ofset štampu, Novi Sad, 2012
(M72) Odbranjen magistarski rad
Pavlović Ž.: Savremeni pristup razvoju merno kontrolnih traka za procesnu grafičku kontrolu, Magistarska teza , Novi Sad, Fakultet tehničkih nauka, 2007
(M85) Prototip, nova metoda, softver, standardizovan ili atestiran instrument,
Novaković D., Pavlović Ž., Pavlović Ž., Zeljković Ž., Nedeljković U., Dedijer S., Kašiković N., Vladić G., Pál (Apro) M., Avramović D., Pinćjer I., Milić N., Tomić I., Jurič (Rilovski) I., Đurđević S.: Softverski model za unapređenje znanja i proizvodnje u grafičkoj industriji, Tehničko rešenje, 2015
