Pal Terek, PhD is an Associate professor at the Faculty of Technical Sciences, Department for production engineering, University of Novi Sad. He is the Head of the Center for surface engineering and nanotechnologies. He is teaching lectures at undergraduate, graduate level and doctoral studies, on the subjects: surface engineering, heat treatment, casting technology, nanotechnology, mechanical engineering in medicine and bioengineering. His main research fields are: characterization and development of protective coatings intended for application on tools used for materials processing and application of coatings in biomedical field; tribological behavior of materials and layers; casting technology and heat treatment. Over the years he participated in many international scientific and exchange projects and has a fruitful collaboration with industry.He is a member of the editorial board od the Journal, Advanced technologies and materials, and a reviewer of a larger number of international scientific journals.
() Researches published in the journals of the international importance
Kovačević L., Terek P., Kakaš D., Miletić A.: A correlation to describe interfacial heat transfer coefficient during solidification of Al–Si alloy casting, Journal of Materials Processing Technology, 2012, Vol. 212, No 9, pp. 1856-1861, ISSN 0924-0136
() Researches published in the journals of the international importance
Terek P., Kovačević L., Miletić A., Kukuruzović D., Baloš S., Škorić B.: Improved ejection test for evaluation of soldering tendency of cast alloy to die core materials, Journal of Materials Processing Technology, 2019, Vol. 216, pp. 114-124, ISSN 0924-0136
() Researches published in the journals of the international importance
Erceg T., Vukić (Skerlić) N., Šovljanski O., Teofilović V., Porobić S., Baloš S., Kojić S., Terek P., Banjanin B., Rakić S.: Preparation and characterization of biodegradable cellulose acetate-based films with novel plasticizer obtained by polyethylene terephthalate glycolysis intended for active packaging, Cellulose, 2023, ISSN 0969-0239
() Researches published in the journals of the international importance
Miletić A., Panjan P., Čekada M., Kovačević L., Terek P., Kovač J., Dražič G., Škorić B.: Nanolayer CrAlN/TiSiN coating designed for tribological applications, Ceramics International, 2021, ISSN 0272-8842
() Research published in the top international journal
Terek P., Kovačević L., Miletić A., Panjan P., Baloš S., Škorić B., Kakaš D.: Effects of die core treatments and surface finishes on the sticking and galling tendency of Al–Si alloy casting during ejection, Wear, 2016, Vol. 356, pp. 122-134, ISSN 0043-1648
() Research published in the top international journal
Lužanin O., Gudurić V., Bernhardt A., Movrin D., Damjanović-Vasilić Lj., Terek P., Ostojić G., Stankovski S.: Impact of In-Process Crystallinity of Biodegradable Scaffolds Fabricated by Material Extrusion on the Micro- and Nanosurface Topography, Viability, Proliferation, and Differentiation of Human Mesenchymal Stromal Cells (https://doi.org/10.3390/polym15061468), Polymers, 2023, Vol. 15, No. 1468, ISSN 2073-4360
() Research published in the top international journal
Terek P., Kovačević L., Miletić A., Kukuruzović D., Baloš S., Škorić B.: Improved ejection test for evaluation of soldering tendency of cast alloy to die core materials, Journal of Materials Processing Technology, 2019, Vol. 266, pp. 114-124, ISSN 0924-0136
() Research published in the top international journal
Bobić Z., Kojić S., Stojanović G., Terek V., Kovačević L., Terek P.: Nanotopography Evaluation of NiTi Alloy Exposed to Artificial Saliva and Different Mouthwashes, Materials, 2022, Vol. 15, No. 23, pp. 8705-8705, ISSN 1996-1944
() Research published in the top international journal
Terek P., Kovačević L., Miletić A., Škorić B., Kovač J., Drnovšek A.: Metallurgical Soldering of Duplex CrN Coating in Contact with Aluminum Alloy, Coatings, 2020, Vol. 10, No 3, pp. 303-320, ISSN 2079-6412
() Research published in the top international journal
Terek V., Kovačević L., Drnovšek A., Panjan P., Škorić B., Kovač J., Bobić Z., Terek P.: High-temperature tribological behavior of nanolayered TiAlN/TiSiN coating deposited on WC-Co cemented carbide, Surface and Coatings Technology, 2024, Vol. 477, ISSN 0257-8972
() Research published in the prominent international journal
Terek P., Kovačević L., Terek V., Bobić Z., Miletić A., Škorić B., Čekada M., Drnovšek A.: Surface Roughness and Its Effect on Adhesion and Tribological Performance of Magnetron Sputtered Nitride Coatings, Coatings, 2024, Vol. 14, No. 8, ISSN 2079-6412
() Research published in the prominent international journal
Drnovšek A., Kukuruzović D., Terek P., Miletić A., Čekada M., Panjan M., Panjan P.: Microstructural, Mechanical and Oxidation Resistance of Nanolayer Sputter-Deposited CrAlN Hard Coatings, Coatings, 2023, No. 13, pp. 2096-30116, ISSN 2079-6412
() Research published in the prominent international journal
Panjan P., Aljaž D., Terek P., Miletić A., Miha Č., Panjan M.: Comparative study of tribological behavior of TiN hard coatings deposited by various PVD deposition techniques, Coatings, 2022, Vol. 12, No. 3, pp. 294-318, ISSN 2079-6412
() Research published in the prominent international journal
Kakaš D., Kovačević L., Terek P., Krumes D., Kolumbić Z.: Use of SEM and EDS analysis in the investigation of Al-Si-Cu piston alloy cast porosity, Metalurgija, 2009, Vol. 48, No 3, pp. 171-174, ISSN 0543-5846, UDK: 669+621.7+51/54(05)=163.42=111
() Research published in the prominent international journal
Kovačević L., Terek P., Miletić A., Kakaš D.: Dependence of interfacial heat transfer coefficient on casting surface temperature during solidification of Al–Si alloy castings cast in CO2 sand mold, Heat and Mass Transfer, 2014, Vol. 50, No 8, pp. 1115-1124, ISSN 0947-7411
() Research published in the prominent international journal
Kakaš D., Terek P., Miletić A., Kovačević L., Vilotić M., Škorić B.: Friction and wear of low temperature deposited TiN coating sliding in dry conditions at various speeds, Tehnicki vjesnik - Technical Gazette, 2013, Vol. 20, No 1, pp. 27-33, ISSN 1330-3651
() Research published in the prominent international journal
Kovačević L., Terek P., Miletić A., Kukuruzović D., Škorić B., Panjan P.: Industrial evaluation of duplex PVD hard coatings for HPDC, Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2018, Vol. 40, No 5, pp. 271-271, ISSN 1678-5878
() Research published in the international journal
Miletić A., Terek P., Kovačević L., Vilotić M., Kakaš D., Škorić B., Kukuruzović D.: Influence of substrate roughness on adhesion of TiN coatings, Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2014, Vol. 36, No 2, pp. 293-299, ISSN 1678-5878
() Research published in the international journal
Influence of interfacial layer thickness and substrate roughness on adhesion of TiN coatings deposited at low temperatures by IBAD, Kakas, D., Terek, P., Kovacevic, L. , Miletic, A., Skoric, B. , Surface Review and Letters Volume 18, Issue 3-4, June 2011, Pages 83-90
() Research published in the journal of the international importance verified by the special resolution
Terek P., Kovačević L., Miletić A., Kukuruzović D., Škorić B., Drnovšek A., Panjan P.: Ejection performance of coated core pins intended for application on high pressure die casting tools for aluminium alloys processing, Tribology in Industry, 2017, Vol. 39, No 3, pp. 334-339, ISSN 0354-8996
() Research published in the journal of the international importance verified by the special resolution
Kakaš D., Škorić B., Terek P., Miletić A., Kovačević L., Vilotić M.: Mechanical Properties of TiN Coatings Deposited at Different Temperatures by IBAD Process, FME Transactions, 2012, Vol. 40, No 1, pp. 37-42, ISSN 1451-2092
() Report from the international meeting printed in its entirety
Kovačević L., Terek P., Miletić A., Kukuruzović D., Škorić B.: Influence of computational grid density on results of casting simulation, 13. International Scientific Conference "Flexible Technologies" - MMA, Novi Sad: Faculty of Technical Sciences, Department of Production Engineering, 28-29 Septembar, 2018, pp. 245-248, ISBN 978-86-6022-094-5
() Report from the international meeting printed in its entirety
Kukuruzović D., Terek P., Kovačević L., Škorić B., Baloš S., Panjan P., Čekada M., Miletić A.: Estimation of soldering tendency of Al-alloy toward CrAlN as a candidate coating for HPDC tools, 13. International Scientific Conference "Flexible Technologies" - MMA, Novi Sad: Faculty of Technical Sciences, Department of Production Engineering, 28-29 Septembar, 2018, pp. 249-252, ISBN 978-86-6022-094-5
() Report from the international meeting printed in its entirety
Miletić A., Panjan P., Čekada M., Terek P., Kovačević L., Škorić B.: Mechanical and tribological properties of industrially prepared TiAlN hard ceramic coatings, 13. International Scientific Conference "Flexible Technologies" - MMA, Novi Sad: Faculty of Technical Sciences, Department of Production Engineering, 28-29 Septembar, 2018, pp. 253-256, ISBN 978-86-6022-094-5
() Report from the international meeting printed in its entirety
Terek P., Kovačević L., Miletić A., Kukuruzović D., Škorić B., Drnovšek A., Panjan P.: Cast alloy soldering tendency and corrosion resistance of duplex PVD coatings for application on die casting tools for aluminum alloys processing, 60. Annual Technical Conference - SVC TechCon, Providence: Society of vacuum coaters, 29-4 April, 2017, pp. 1-6
() Report from the international meeting printed in its entirety
Terek P., Kovačević L., Miletić A., Kukuruzović D., Škorić B., Drnovšek A., Panjan P.: Ejection performance of coated core pins intended for application on die casting tools for aluminium alloys procesing, 15. International Conference on Tribology - SERBIATRIB, Kragujevac: Serbian Tribology Society, University of Kragujevac, Faculty of Engineering, 17-19 Maj, 2017, pp. 382-387, ISBN 978-86-6335-041-0
() Report from the international meeting printed in its entirety
Škorić B., Miletić A., Terek P., Kovačević L., Kukuruzović D.: Nano modification of hard coatings with ions, 4. International Scientific Conference on Advances in Mechanical Engineering - ISCAME, Debrecen: Department of Mechanical Engineering, Faculty of Engineering, University of Debrecen, Working Commission in Mechanical Engineering Specialized Committee in Engineering Regional Committee in Debrecen, Hungarian Academy of Sciences Hungary, 13-15 Oktobar, 2016, pp. 485-490, ISBN 978-963-473-917-3
() Report from the international meeting printed in its entirety
Škorić B., Miletić A., Terek P., Kovačević L., Kukuruzović D.: Nano modification of hard coatings with ions, 6. International Conference on Innovative Trends in Science, Engineering and Management - ICITSEM, Dubai, 1-2 Decembar, 2016, pp. 54-58, ISBN 978-963-473-917-3
() Report from the international meeting printed in its entirety
Terek P., Kovačević L., Miletić A., Kukuruzović D., Škorić B., Kakaš D.: Improvement of Ejection Test Used for Evaluation of Soldering Tendency Between Casting and Die Materials, 2. Metallurgical and Materials Engineering Congress of South-East Europe - MME SEE, Beograd: Assicoation of Metallurgical Engineers Serbia, 3-5 Jun, 2015, pp. 239-245, ISBN 978-86-87183-27-8
() Report from the international meeting printed in its entirety
Terek P., Kukuruzović D., Miletić A., Panjan P., Kovačević L., Škorić B.: Surface Roughness and Its Effect on Tribological Performance of Magnetron Sputtered Nitride Coatings, 14. International Conference on Tribology - SERBIATRIB, Beograd: Serbian Tribology Society, Faculty of Mechanical Engineering in Belgrade, 13-15 Maj, 2015, pp. 143-148, ISBN 978-86-7083-857-4
() Report from the international meeting printed in its entirety
Kovačević L., Terek P., Miletić A., Kukuruzović D., Kakaš D.: Application of casting simulations in optimization of gating system with vertical runner extension, 12. International Scientific Conference "Flexible Technologies" - MMA, Andrevlje: University of Novi Sad, Faculty of technical sciences, 25-26 Septembar, 2015, ISBN 978-86-7892-722-5
() Report from the international meeting printed in its entirety
Škorić B., Miletić A., Kukuruzović D., Terek P.: Modication of Hard Coatings with Ion Beam, 4. International Congress on Natural Science and Engineering (ICNSE), Kyoto: Higher Education Forum (HEF), Taipei, Taiwan, 7-9 Maj, 2015, pp. 265-272, ISBN 978-986-87417-8-2
() Report from the international meeting printed in its entirety
Miletić A., Terek P., Panjan P., Kovačević L., Kukuruzović D., Škorić B.: Mechanical and tribological properties of nanolayered TiAlN/TiSiN coating, 14. International Conference on Tribology - SERBIATRIB, Beograd: Serbian Tribology Society, Faculty of Mechanical Engineering in Belgrade, 13-15 Maj, 2015, pp. 137-142, ISBN 978-86-7083-857-4
() Report from the international meeting printed in its entirety
Kovačević L., Terek P., Kakaš D., Miletić A., Kukuruzović D.: Determination of Metal-Mold Heat Transfer Coefficient During CO2 Sand Casting, 1. Metallurgical and Materials Engineering Congress of South-East Europe - MME SEE, Beograd: Association of metallurgical engineers of Serbia, 23-25 Maj, 2013, pp. 312-318, ISBN 978-86-87183-24-7
() Report from the international meeting printed in its entirety
Terek P., Kovačević L., Miletić A., Kakaš D., Škorić B., Kukuruzović D.: Adhesion of Low Temperature Tin Coating Governed by Interfacial Layer Thickness and Surface Roughness, 1. Metallurgical and Materials Engineering Congress of South-East Europe - MME SEE, Beograd: Association of metallurgical engineers of Serbia, 23-25 Maj, 2013, pp. 154-160, ISBN 978-86-87183-24-7
() Report from the international meeting printed in its entirety
Kovačević L., Terek P., Kakaš D., Miletić A., Kukuruzović D.: Determination of Metal-Mold Heat Transfer Coefficient During CO2 Sand Casting, 1. Metallurgical and Materials Engineering Congress of South-East Europe - MME SEE, Beograd: Association of metallurgical engineers of Serbia, 23-25 Maj, 2013, pp. 312-318, ISBN 978-86-87183-24-7
() Report from the international meeting printed in its entirety
Terek P., Kovačević L., Miletić A., Kakaš D., Škorić B., Kukuruzović D.: Adhesion of Low Temperature Tin Coating Governed by Interfacial Layer Thickness and Surface Roughness, 1. Metallurgical and Materials Engineering Congress of South-East Europe - MME SEE, Beograd: Association of metallurgical engineers of Serbia, 23-25 Maj, 2013, pp. 154-160, ISBN 978-86-87183-24-7
() Report from the international meeting printed in its entirety
Kukuruzović D., Berić J., Kakaš D., Škorić B., Terek P., Kovačević L., Miletić A., Vilotić M.: Application of a new device for measuring hard coatings thickness uniformity applied on large sized too, 11. International Scientific Conference "Advanced Production Technologies" - MMA, Novi Sad: Faculty of technical sciences, 20-21 Septembar, 2012, pp. 137-140, ISBN 978-86-7892-429-3
() Report from the international meeting printed in its entirety
Kukuruzović D., Blagojević D., Kakaš D., Škorić B., Kovačević L., Terek P., Miletić A., Vilotić M.: The effects of cutting parameters and tool wear on the roughness of machined surface, 11. International Scientific Conference "Advanced Production Technologies" - MMA, Novi Sad: Faculty of technical sciences, 20-21 Septembar, 2012, pp. 141-144, ISBN 978-86-7892-429-3
() Report from the international meeting printed in its entirety
Vilotić M., Kakaš D., Terek P., Kovačević L., Kukuruzović D., Miletić A.: Severe Plastic Deformation by Compression, 11. International Scientific Conference "Advanced Production Technologies" - MMA, Novi Sad: Faculty of technical sciences, 20-21 Septembar, 2012, pp. 497-500, ISBN 978-86-7892-429-3
() Report from the international meeting printed in its entirety
Kakaš D., Škorić B., Terek P., Kovačević L., Vilotić M., Miletić A.: Influence of sliding speed and surface roughness on the friction coefficient and wear TiN coatings deposited at low temperature, 12. International Conference on Tribology - SERBIATRIB, Kragujevac: Mašinski fakultet Kragujevac, 11-13 Maj, 2011, pp. 131-137, ISBN 978-86-86663-74-0
() Report from the international meeting printed in its entirety
Vilotić M., Kakaš D., Terek P., Kovačević L., Miletić A.: Neutral radius value determination by numerical simulation method at ring upsetting test, 12. International Conference on Tribology - SERBIATRIB, Kragujevac: Mašinski fakultet Kragujevac, 11-13 Maj, 2011, pp. 300-305, ISBN 978-86-86663-74-0
() Report from the international meeting printed in its entirety
Kakaš D., Škorić B., Miletić A., Terek P., Kovačević L., Vilotić M.: Influence of substrate roughness on adhesion strength of hard TiN films , 34. International Conference on Production Engineering, Niš: Univerzitet u Nišu, Mašinski fakultet u Nišu Aleksandra Medvedeva br 14 18000 Niš Srbija, 28-30 Septembar, 2011, pp. 79-82, ISBN 978 – 86 – 6055 – 01
() Report from the international meeting printed in its entirety
Kakaš D., Škorić B., Terek P., Miletić A., Kovačević L., Vilotić M.: Mechanical properties of TiN coatings deposited at different temperatures by IBAD, 34. International Conference on Production Engineering, Niš: Univerzitet u Nišu, Mašinski fakultet u Nišu Aleksandra Medvedeva br 14 18000 Niš Srbija, 28-30 Septembar, 2011, pp. 83-86, ISBN 978 – 86 – 6055 – 01
() Report from the international meeting printed in its entirety
Vilotić M., Kakaš D., Miletić A., Kovačević L., Terek P.: Influence of friction coefficient on workpiece roughness in ring upsetting process, 34. International Conference on Production Engineering, Niš: Univerzitet u Nišu, Mašinski fakultet u Nišu Aleksandra Medvedeva br 14 18000 Niš Srbija, 28-30 Septembar, 2011, pp. 527-530, ISBN 978 – 86 – 6055 – 01
() Report from the international meeting printed in its entirety
Kakaš D., Škorić B., Terek P., Miletić A., Kovačević L., Vilotić M.: Influence of dry sliding conditions and coating roughness on the wear of titanium nitride coatings deposited at low temperature, 7. International Conference on Tribology - BALKANTRIB, Thessaloniki: Laboratory for Machine Tools and Manufacturing Engineering (EE??) of the Aristoteles University of Thessaloniki and of the Fraunhofer Project Center Coatings in Manufacturing (PCCM), 3-5 Oktobar, 2011, pp. 49-57, ISBN 987-960-98780-6-7
() Report from the international meeting printed in its entirety
Kakaš D., Škorić B., Miletić A., Terek P., Kovačević L., Vilotić M.: Influence of substrate roughness on adhesion of TiN films prepared by ion beam assisted deposition, 9. International Conference in Manufacturing Engineering - THE "A" Coatings, Thessaloniki: Laboratory for Machine Tools and Manufacturing Engineering (EE??) of the Aristoteles University of Thessaloniki and of the Fraunhofer Project Center Coatings in Manufacturing (PCCM), 3-5 Oktobar, 2011, pp. 295-302, ISBN 978-960-98780-5-0
() Report from the international meeting printed in its entirety
Ivanišević A., Kačmarčik I., Terek P., Štrbac B.: NUMERICAL SIMULATION OF UPSETTING OF CYLINDER BY CONICAL DIE WITH EXPERIMENTAL TEST, 1. International Conference on Innovative Technologies IN-TECH, Prague, 14-16 Septembar, 2010, pp. 352-355, ISBN 978-80-904508-2-6
() Report from the international meeting printed in its entirety
Kakaš D., Škorić B., Babić M., Mitrović S., Miletić A., Vilotić M., Terek P., Kovačević L.: Surface roughness and friction coefficient at IBAD deposited TiN hard coating, 11. International Conference on Tribology - SERBIATRIB, Beograd: Serbian Tribology Society, 13-15 Maj, 2009, pp. 145-148, ISBN 978-86-7083-659-4
() Report from the international meeting printed in its entirety
Kakaš D., Škorić B., Miletić A., Vilotić M., Terek P., Kovačević L.: Investigation of micro and nano tribological phenomenon by EDX, 11. International Conference on Tribology - SERBIATRIB, Beograd: Serbian Tribology Society, 13-15 Maj, 2009, pp. 159-163, ISBN 978-86-7083-659-4
() Report from the international meeting printed in its entirety
Kakaš D., Kovačević L., Terek P.: Improvement of casting process control by computer simulation and experimental observation , 3. International Conference on Manufacturing Engineering - ICMEN, Chalkidiki: Aristoteles University of Thessaloniki and of the Fraunhofer Project Center Coatings in Manufacturing (PCCM), 1-3 Oktobar, 2008, pp. 273-279, ISBN 978-960-243-649-3
() Report from the international meeting printed in extracts
Kakaš D., Kovačević L., Terek P., Krumes D., Kolumbić Z.: Use of SEM and EDS analysis in the investigation of Al-Si-Cu piston alloy cast porosity, Metalurgija, 2008, pp. 247-247, ISSN 0543-5846, 8. International Symposium of Croatian Metallurgical Society - SHMD, Šibenik: Croatian Metallurgical Society (CMS), 22-26 Jun, 2008, pp. 247-247, ISBN 0543-5846
() Report from the international meeting printed in extracts
Miletić A., Škorić B., Panjan P., Čekada M., Kovačević L., Terek P.: Microstructure of nanocomposite TiSiN and nanolayered TiSiN/TiAlN coatings, 36. Microscopy Conference - MC, Regensburg: German Society for Electron Microscopy, 25-30 Avgust, 2013, pp. 613-614
() Report from the international meeting printed in extracts
Miletić A., Škorić B., Panjan P., Kovačević L., Terek P., Vilotić M., Kukuruzović D.: Characterization of nanostructured TiAlN/TiSiN coatings, 10. Students’ Meeting, Processing and Application of Ceramics, Novi Sad, 6-9 Novembar, 2013, ISBN 978-86-6253-028-8
() Research published in the leading journal of the national importance
Škorić B., Miletić A., Terek P., Kovačević L., Kukuruzović D.: Nano modification of hard coatings with ions, International Journal of Science and Research, 2016, Vol. 2, No 4, pp. 1-5, ISSN 2412-4389
() Research published in the leading journal of the national importance
Vilotić M., Kakaš D., Šiđanin (Sidjanin) L., Alexandrov S., Jeng Yeau R., Terek P.: Severe Plastic Deformation by Multistage Compression, Journal for Technology of Plasticity, 2013, Vol. 38, No 1, pp. 33-40, ISSN 0354-3870, UDK: 621.7
() Research published in the leading journal of the national importance
Vilotić M., Kakaš D., Terek P., Kovačević L., Miletić A.: Neutral Radius Value Determination by Numerical Simulation Method at Ring Upsetting Test, Tribology in industry - International Journal of Yugoslav Tribology Society, 2011, Vol. 33, No 3, pp. 122-127, ISSN 0354-8996
() Research published in the leading journal of the national importance
Kakaš D., Kovačević L., Terek P.: Mold filling improvement by computer simulation and parameter variation, Annals of Faculty Engineering Hunedoara - International Journal of Engineering, 2009, Vol. 7, No 1, pp. 83-88, ISSN 1584-2665
() Research published in the leading journal of the national importance
Kakaš D., Kovačević L., Terek P.: Computer simulation and experimental research of cast piston porosity , Annals of Faculty Engineering Hunedoara - International Journal of Engineering, 2007, Vol. 5, No 2, pp. 179-184, ISSN 1584-2665
() Research published in the leading journal of the national importance
Vilotić M., Kakaš D., Šiđanin (Sidjanin) L., Alexandrov S., Jeng Yeau R., Terek P.: Severe Plastic Deformation by Multistage Compression, Journal for Technology of Plasticity, 2013, Vol. 38, No 1, pp. 33-40, ISSN 0354-3870, UDK: 621.7
() Research published in the journal of the national importance
Kakaš D., Škorić B., Babić M., Mitrović S., Miletić A., Vilotić M., Terek P., Kovačević L.: Surface roughness and friction coefficient in IBAD deposited TiN hard coating, FME Transactions, 2009, Vol. 37, No 2, pp. 83-86, ISSN 1451-2092, UDK: 621
() Research published in the journal of the national importance
Kakaš D., Škorić B., Mitrović S., Babić M., Terek P., Miletić A., Vilotić M.: Influence of Load and Sliding Speed on Friction Coefficient of IBAD Deposited TiN, Tribology in industry, 2009, Vol. 31, pp. 3-10
() Research published in the scientific journal
Vilotić M., Kakaš D., Miletić A., Kovačević L., Terek P.: Influence of friction coefficient on workpiece roughness in ring upsetting process, Journal of Production Engineering, 2012, Vol. 15, No 1, pp. 49-52, ISSN 1821-4932, UDK: 621
() Invited lectures from the meeting of the national importance printed in its entirety
Kakaš D., Škorić B., Vilotić M., Terek P., Miletić A., Kovačević L.: Nanomodifikacije površina – unapređenje karakteristika materijala, 1. Savetovanje: Napredni materijali i mogućnosti njihove primene, Požarevac: Narodna tehnika Požarevac, Društvo hemičara, tehnologa i metalurga Požarevac, Veljka Dugoševića 14 Požarevac, 21 Decembar, 2011, pp. 30-39, ISBN 978-86-911159-2-0
() Invited lectures from the meeting of the national importance printed in its entirety
Kakaš D., Škorić B., Miletić A., Terek P., Kovačević L., Vilotić M.: Razvoj nanokompozitnih prevlaka visoke tvrdoće, 1. Savetovanje "Kompozitni materijali i mogućnosti njihove primene", Požarevac: Narodna Tehnika Požarevac, 27 Avgust, 2010, pp. 88-99, ISBN 978-86-912123-3-9
() Report from the meeting of the national importance printed in its entirety
Kakaš D., Škorić B., Vilotić M., Terek P., Miletić A., Kovačević L.: Measuring nano-tribological processes at TiN hard coating, 9. Međunarodna konferencija o dostignućima elektrotehnike, mašinstva i informatike - DEMI, Banja Luka: Mašinski fakultet Banjaluka, 28-29 Maj, 2009, pp. 235-240, ISBN 978-99938-39-23-1
() Report from the meeting of the national importance printed in its entirety
Kakaš D., Kovačević L., Terek P.: Primena računarskih simulacija za poboljšanje tehnologije kokilnog livenja aluminijumskih legura, 32. Savetovanje proizvodnog mašinstva Srbije sa međunarodnim učešćem, Novi Sad: Fakultet Tehničkih Nauka, Novi Sad, 18-20 Septembar, 2008, pp. 245-248, ISBN 978-86-7892-131-5
() Report from the meeting of the national importance printed in extracts
Kakaš D., Kovačević L., Terek P.: CAST POROSITY INVESTIGATION BY ELECTRON MICROSCOPY , 4. Serbian Congress for Microscopy - SCM, Beograd: Srpsko društvo za mikroskopiju, 11-12 Oktobar, 2010, pp. 47-48, ISBN 978-86-7306-104-7
() Report from the meeting of the national importance printed in extracts
Kakaš D., Škorić B., Terek P., Kovačević L., Miletić A., Vilotić M.: MICRO/NANO-TRIBOLOGICAL PHENOMENON INVESTIGATION BY AFM AND SEM, 4. Serbian Congress for Microscopy - SCM, Beograd: Srpsko društvo za mikroskopiju, 11-12 Oktobar, 2010, pp. 49-50, ISBN 978-86-7306-104-7
