Nataša Samardžić, Assistant Professor, Ph.D. in Electrical and Computer Engineering, Faculty of Technical Sciences, University of Novi Sad, Novi Sad, Serbia
Nataša Samardžić received B.Sc. and M.Sc. degrees in electrical and computer engineering from the Faculty of Technical Sciences, University of Novi Sad (FTS-UNS), Serbia in 2009 and 2010, respectively. She was rewarded several times for excellent success during her studies (average grade 10.00). In 2011, she joined Department of Power, Electronics and Telecommunication, Chair for Electronics at Faculty of Technical Sciences as Intern Research. Starting from 2013, she was engaged as Teaching assistant, at several Undergraduate and Master courses on the study program for Microelectronics and Biomedical engineering including: 1) Introduction to electronics, 2) Materials in electronics, 3) Nanoelectronics, 4) Quantum and organic electronics and 5) Medical electronics. During her PhD studies she spent two months at EPFL, Lausanne where she worked in CMI-Center of Micro Nano Technology as part of activities within FP7-REGPOT project APOSTILLE. In december 2016. she defended PhD thesis entitled “Analysis of quantum transport mechanisms in nanometarial based memristive device” at Faculty of Technical Sciences, University of Novi Sad. Starting from November 2017, Natasa Samardzic is Assistant Professor at FTS-UNS. She is reviewer for several scientific journals with impact factor: Journal of Applied Physics, International Journal of Electronics and Communications and Processing and Applications of Ceramics. She is engaged in the scientific project funded by Ministry of Education, Science and Technological Development of Republic of Serbia (III 45021) and in the project funded by Horizon 2020 program (RISE 690876). She is a member of Working Group 1, Memristor Device Technology of MemoCIS COST Action IC1401. During action activities she gave invited lecture at 6th MemoCIS Workshop in Krakow (September 2017) entitled “Resistive Switching Effect in Nanomaterials based Thin Film Memristors”. In July 2018, she was invited speaker at Volga Neuroscience Meeting 2018, where she gave lecture on “Nanomaterials based thin film memristors and their potential application in neuromorphic systems”. She is member of IEEE society and OE-A society. Her research interest includes modeling and fabrication of nanoelectronic devices and characterization of nanomaterials.
() Research published in the top international journal
Samardžić N., Mionić M., Dakić B., Hofmann H., Dautović S., Stojanović G.: Analysis of Quantized Electrical Characteristics of Microscale TiO2 Ink-jet Printed Memristor, IEEE Transactions on Electron Devices, 2015, ISSN 0018-9383, UDK: 10.1109/TED.2015.2421283
() Research published in the top international journal
Tripković Đ., Vukmirović J., Bajac B., Samardžić N., Đurđić E., Stojanović G., Srdić V.: Inkjet patterning of in situ sol–gel derived barium titanate thin films, Ceramics International, 2016, Vol. 42, pp. 1840-1846, ISSN 0272-8842
() Research published in the top international journal
Menićanin A., Živanov Lj., Stojanović G., Samardžić N., Radjelović D.: Transport parameters of inkjet printed nanoparticle silver on polyimide substrate measured at room and liquid nitrogen temperatures, IEEE Transactions on Electron Devices, 2013, Vol. 60, No 9, pp. 2963-2967, ISSN 0018-9383
() Research published in the top international journal
Jeranče N., Vasiljević D., Samardžić N., Stojanović G.: A Compact Inductive Position Sensor Made by Inkjet Printing Technology on a Flexible Substrate, Sensors, 2012, Vol. 12, pp. 1288-1298, ISSN 1424-8220, UDK: 10.3390/s120201288
() Research published in the top international journal
Cvejin K., Mojić B., Samardžić N., Srdić V., Stojanović G.: Dielectric studies of barium bismuth titanate as a material for application in temperature sensors, Journal of Materials Science: Materials in Electronics, 2013, Vol. 24, No 4, pp. 1243-1249, ISSN 0957-4522
() Research published in the prominent international journal
Radović M., Dubourg G., Dohcevic-Mitrovic Z., Stojadinovic B., Vukmirović J., Samardžić N., Bokorov M.: SnO2 nanosheets with multifunctional properties for flexible gas-sensors and UVA light detectors, Journal of Physics D: Applied Physics, 2019, Vol. 52, pp. 99999-99999, ISSN 0022-3727
() Research published in the prominent international journal
Stojanović G., Paroški M., Samardžić N., Radovanović M., Krstić D.: Microfluidics-Based Four Fundamental Electronic Circuit Elements Resistor, Inductor, Capacitor and Memristor, Electronics (Basel), 2019, Vol. 8, No 9, pp. 960-972, ISSN 2079-9292
() Research published in the prominent international journal
Samardžić N., Bajac B., Bajić J., Đurđić E., Miljević B., Srdić V., Stojanović G.: Photoresistive switching of multiferroic thin film memristors, Microelectronic Engineering, 2018, ISSN 0167-9317, UDK: 10.1016/j.mee.2017.10.018
() Research published in the prominent international journal
() Research published in the international journal
Jeranče N., Stojanović G., Samardžić N., Kesler D.: Parallel computing applied to inductance calculation for flexible inductors, COMPEL - The international journal for computation and mathematics in electrical engineering, 2013, Vol. 32, No 3, pp. 1067-1081, ISSN 0332-1649, UDK: 10.1108/03321641311306097
() Research published in the international journal
Samardžić N., Jeranče N., Stojanović G.: Novel Solution for Flexible Inductive Position Sensor, Sensor Letters, 2013, Vol. 11, No 10, pp. 1881-1886, ISSN 1546-198X
() Research published in the international journal
Dautović S., Samardžić N., Juhas A.: Takacs Model of Hysteresis in Mathematical Modeling of Memristors (accepted for publication Nov 10 2019), Radioengineering, 2019, ISSN 1210-2512
() Invited lectures from the international meeting printed in its entirety
Samardžić N.: Resistive Switching Effects in Nanomaterials Based Memristors , 25. Telekomunikacioni forum TELFOR, Beograd, 21-22 Novembar, 2017
() Invited lectures from the international meeting printed in extracts
N. Samardzic, "Nanomaterials based thin film memristors and their potential application in neuromorphic systems", Volga Neuroscience Meeting 2018, Nizhny Novgorod , 22-27 July, 2018.
() Report from the international meeting printed in its entirety
Jeranče N., Samardžić N., Vasiljević D., Stojanović G.: Modelling and design of passive components for flexible electronics, 16. International Symposium on Power Electronics – Ee, Novi Sad, 26-28 Oktobar, 2011, pp. 1-5
() Report from the international meeting printed in its entirety
Samardžić N., Jeranče N., Stojanović G.: Optimization and modeling of ink-jet printed flexible position sensor, 2. ICMAST-International Conference on Materials and Applications for Sensors and Transducers, Budimpešta, 24-28 Maj, 2012
() Report from the international meeting printed in its entirety
Samardžić N., Kojić T., Vukmirović J., Tripković Đ., Bajac B., Srdić V., Stojanović G.: Performance analysis of resistive switching devices based on BaTiO3 thin films , 5. International Conference on Materials and Applications for Sensors and Transducers (IC-MAST), Mykonos, 27-30 Septembar, 2015
() Report from the international meeting printed in its entirety
Samardžić N., Bajić J., Bajac B., Srdić V., Stojanović G.: Photoresistive switching of multiferroic thin film memristors, 5. International Conference on Memristive Materials, Devices and Systems MEMRISYS, Athens, 3-6 April, 2017
() Report from the international meeting printed in its entirety
Radovanović M., Kojić S., Vasiljević D., Samardžić N., Crespo F., Cargou S., Velve Casquillas G., Chirasatitsin S., Stojanović G.: Performances comparison of microfludic passive mixer fabricated in low-cost and PDMS technologies, 8. PSU-UNS International Conference on Engineering and Technology - ICET, Novi Sad, 8-10 Jun, 2017
() Report from the international meeting printed in its entirety
Gambuzza L., Samardžić N., Dautović S., Xibilia M., Graziani S., Fortuna L., Stojanović G., Frasca M.: A data driven model of TiO2 printed memristors, 8th International Conference on Electrical and Electronics Engineering (ELECO2013), November 28-30 2013, Bursa, Turkey
() Report from the international meeting printed in its entirety
Samardžić N., Vasiljević D., Jeranče N., Stojanović G.: Design and fabrication of flexible ink-jet printed resonant-circuit sensor, 35. International Spring Seminar on Electronics Technology, Beč: Vienna University of Technolog, 9-13 Maj, 2012, pp. 1-4
() Report from the international meeting printed in its entirety
Jeranče N., Samardžić N., Vasiljević D., Stojanović G.: An efficient computational technique for performance prediction of inductors on flexible substrates, 5. Advanced Electromagnetics Symposium – AES, Paris, 16-19 April, 2012
() Report from the international meeting printed in its entirety
Menićanin A., Živanov Lj., Damnjanović M., Marić A., Samardžić N.: Ink-jet Printed CPW Inductors in Flexible Technology, 35. International Convention on Information and Communication Technology, Electronics and Microelectronics - MIPRO, Opatija: Croatian Society for Information and Communication Technology, Electronics and Microelectronics - MIPRO, 21-25 Maj, 2012, pp. 239-242, ISBN 978-953-233-069-4
() Report from the international meeting printed in extracts
Jeranče N., Samardžić N., Vasiljević D., Stojanović G.: Design and fabrication of printed flexible capacitors and inductors, 1. Swiss e-Print, Basel, 1-2 Decembar, 2011
() Report from the international meeting printed in extracts
Sekulić D., Samardžić N., Joža A., Satarić M.: New insight into the role of C–terminal tails in intracellular transport along microtubules, 1. Biology for Physics Conference: Is there new Physics in Living Matter, Barcelona, 15-18 Januar, 2017, pp. 45-46, ISBN 978–86–915627–4–8
() Report from the international meeting printed in extracts
Samardžić N., Stojanović G., Damjanovic D., Hofmann H., Mionic M.: Fabrication and characterization of ink-jet printed TiO2 based memristors, 1. FEMS Junior Euromat, Lausanne, 10-14 Jul, 2016
() Report from the international meeting printed in extracts
Vukmirović J., Bajac B., Tripković Đ., Samardžić N., Mojić B., Stojanović G., Srdić V.: Synthesis and characterization of barium titanate sols and their application for film fabrication by in-jet printing, 15. Annual Conference-YUCOMAT, Herceg Novi, 2-6 Septembar, 2013, pp. 90-90
() Report from the international meeting printed in extracts
Vukmirović J., Bajac B., Tripković Đ., Samardžić N., Mojić B., Stojanović G., Srdić V.: Synthesis and characterization of barium titanate sols and their application for film fabrication by ink-jet printing, 15. Annual Conference-YUCOMAT, Herceg Novi, 2-6 Septembar, 2013, pp. 90-90
() Report from the international meeting printed in extracts
Samardžić N., Nedeljković M., Vukmirović J., Srdić V., Stojanović G.: Study on effect of Zr dopping on the electrical properties of BaTiO3 thin film resistive switching devices, 6. International Congress on Microscopy & Spectroscopy (INTERM 2019), Mugla, 12-18 Maj, 2019
() Research published in the journal of the national importance
Petrović M., Kitić D., Samardžić N., Kostić M., Stojanović G., Igic M., Kostić M., Mionić Ebersold M.: THE EFFECT OF HERBAL EXTRACT (FOENICULUM VULGARE MILL.) SOLUTION ON THE MECHANICAL AND WETTING PROPERTIES OF HEAT POLYMERIZED DENTURE BASE RESIN, Acta stomatologica Naissi, 2016, ISSN 0352-5252, UDK: 10.5937/asn1674623P
() Research published in the scientific journal
Samardžić N.: Karakterizacija, optimizacija i uporedni prikaz n i p-tipa GaAs/AlGaAs infracrvenih fotodetektora na bazi kvantnih jama, Zbornik radova Fakulteta tehničkih nauka, 2010, Vol. 15, ISSN 0350-428X, UDK: 004.3
() Research published in the scientific journal
Jeranče N., Samardžić N., Vasiljević D., Stojanović G.: Modeling and design of passive components for flexible electronics, Electronics, 2012, Vol. 16, No 1, pp. 57-61, ISSN 1450-5843, UDK: 621.38
() Invited lectures from the meeting of the national importance printed in its entirety
Kojić S., Stojanović G., Vasiljević D., Samardžić N.: Mogućnosti ink-jet štampane elektronike, 1. International Scientific Conference "Metrology and Quality in Production Engineering and Environmental Protection" - ETIKUM, Novi Sad, 12-13 Jun, 2013, pp. 35-38, ISBN 978-86-7892-512-2
() Report from the meeting of the national importance printed in its entirety
Kojić S., Bednar N., Vasiljević D., Radovanović M., Samardžić N.: Merenje i kontrola materijala u nanotehnologijama, 1. International Scientific Conference "Metrology and Quality in Production Engineering and Environmental Protection" - ETIKUM, Novi Sad, 12-13 Jun, 2013, pp. 27-30, ISBN 978-86-7892-512-2
() Defended Doctoral dissertation
Samardžić N.: Analiza kvantnih mehanizama transporta prisutnih u memristivnim uredjajima na bazi nanomaterijala, 2016
() Prototype, new methods, software, standardized and certified instrument
Dakić B., Samardžić N., Stojanović G.: Sistem za akviziciju signala sa 2D kapacitivne matrice, 2014
