() Researches published in the journals of the international importance
Orošnjak M., Brkljač N., Šević D., Čavić M., Oros D., Penčić M.: From predictive to energy-based maintenance paradigm: Achieving cleaner production through functional-productiveness, Journal of Cleaner Production, 2023, Vol. 408, No. 137177, ISSN 0959-6526
() Research published in the top international journal
Penčić M., Čavić M., Oros D., Vrgović P., Babković K., Orošnjak M., Čavić D.: Anthropomorphic Robotic Eyes: Structural Design and Non-Verbal Communication Effectiveness, Sensors, 2022, Vol. 22, No. 8, pp. 1-45, ISSN 1424-8220, UDK: DOI: 10.3390/s22083060
() Research published in the prominent international journal
Oros D., Penčić M., Šulc J., Čavić M., Stankovski S., Ostojić G., Ivanov O.: Smart Intravenous Infusion Dosing System, Applied Sciences, 2021, Vol. 11, No 2, pp. 1-26, ISSN 2076-3417, UDK: DOI: 10.3390/app11020513
() Research published in the prominent international journal
Oros D., Penčić M., Šulc J., Čavić M., Stankovski S., Ostojić G., Ivanov O.: Smart Intravenous Infusion Dosing System, Applied Sciences, 2021, Vol. 11, No. 2, pp. 1-26, ISSN 2076-3417, UDK: DOI: 10.3390/app11020513
() Research published in the prominent international journal
Stankovski S., Tarjan L., Oros D., Ostojić G., Šenk I.: Using a Didactic Manipulator in Mechatronics and Industrial Engineering Courses, IEEE Transactions on Education, 2010, Vol. 53, No 4, pp. 572-579, ISSN 0018-9359
() Research published in the international journal
Oros D., Baranovski I., Dragičević D., Stankovski S., Ostojić G., Miladinović Lj.: Development of Didactic Set of Pneumatics and Servo Pneumatics in Engineering Education, Transactions of Famena, 2012, Vol. 36, No 3, pp. 69-79, ISSN 1333-1124
() Research published in the international journal
Stankovski S., Ostojić G., Tarjan L., Oros D., Lazarević M.: IML Robot Grasping Process Improvement, Iranian Journal of Science and Technology, Transactions B, 2011, Vol. 35, No M1, pp. 197-207, ISSN 1028-6284
() Research published in the international journal
Čavić M., Penčić M., Oros D., Čavić D., Orošnjak M., Rackov M.: High-Capacity Stacking Apparatus for Thermoforming Machine – Part I: Synthesis of Intermittent Mechanisms as Stacker Driving Units, Advances in Mechanical Engineering, 2021, Vol. 1, No. X, pp. 1-24, ISSN 1687-8140, UDK: DOI: 10.1177/16878140211040892 (accepted for publication)
() Research published in the international journal
Penčić M., Čavić M., Oros D., Čavić D., Orošnjak M., Karanović V.: High-Capacity Stacking Apparatus for Thermoforming Machine – Part II: Structural Design of the Adjustable Stacker Driving Mechanism, Advances in Mechanical Engineering, 2021, Vol. 13, No. 10, pp. 1-19, ISSN 1687-8140, UDK: DOI: 10.1177/16878140211052458
() Report from the international meeting printed in its entirety
Oros D., Penčić M., Čavić M., Orošnjak M., Čavić D., Lu Z.: PAM Actuators Applications in Robotics: Rapid Review, 10. International Conference on Electrical, Electronic and Computing Engineering IcETRAN, Istočno Sarajevo: IEEE Xplore, New York, 5-8 June, 2023, pp. 1-6, ISBN 979-8-3503-0711-5, UDK: DOI: 10.1109/IcETRAN59631.2023.10192233
() Report from the international meeting printed in its entirety
Orošnjak M., Jocanović M., Penčić M., Oros D.: From Signals to Insights: Uncovering Latent Degradation with Deep Learning as a stepping stone towards Digital Twins of Failures (DTFs), 7. International Conference on System Reliability and Safety, Bologna: IEEE Reliability Society, 22-24 November, 2023, pp. 1-5
() Report from the international meeting printed in its entirety
Tarjan L., Šenk I., Tejić B., Oros D., Baranovski I.: Simulation of Hall sensor based localization in a production process, 4. Regional Conference - Mechatronics in Practice and Education (MECHEDU), Subotica: Subotica Tech - College of Applied Sciences, 4-5 Maj, 2017, pp. 61-71, ISBN 978-86-918815-2-8
() Report from the international meeting printed in its entirety
Šenk I., Tarjan L., Oros D., Stankovski S., Ostojić G.: A Model for Indoor Product Localization Based on the Internet of Things, 17. International Scientific Conference on Industrial Systems, Novi Sad, 4-6 Oktobar, 2017, pp. 86-91, ISBN 978-86-7892-978-6
() Report from the international meeting printed in its entirety
Ostojić G., Tegeltija S., Lazarević M., Oros D., Stankovski S.: Implementation of IoT and FIWARE in Production Systems, 13. International Conference on Systems, Automatic Control and Measurements SAUM, Niš: Faculty of Electronic Engineering, University of Niš, 9-11 Novembar, 2016, pp. 1-4
() Report from the international meeting printed in its entirety
Beg I., Tejić B., Baranovski I., Oros D., Ostojić G., Stankovski S.: Banking kiosk‘s stamping sub-system realization, 3. Regional Conference - Mechatronics in Practice and Education (MECHEDU), Subotica, 14-16 Maj, 2015, pp. 6-9
() Report from the international meeting printed in its entirety
Oros D., Dragičević D., Stankovski S., Ostojić G., Horvat S.: Didactic Model of Servo Pneumatic System, 15. International Scientific Conference on INDUSTRIAL SYSTEMS - IS, Novi Sad: University of Novi Sad - Faculty of Technical Sciences, Department of Industrial Engineering and Management, 14-16 Septembar, 2011, pp. 156-159, ISBN 978-86-7892-341-8
() Research published in the leading journal of the national importance
Arsenijević D., Stankovski S., Ostojić G., Baranovski I., Oros D.: IoT Application Perspectives in Higher Education, Journal of Mechatronics, Automation and Identification Technology – JMAIT, 2018, Vol. 3, No 3, pp. 21-26, ISSN 2466-3603
() Research published in the leading journal of the national importance
Arsenijević D., Stankovski S., Ostojić G., Baranovski I., Oros D.: IoT Application Perspectives in Higher Education, Journal of Mechatronics, Automation and Identification Technology – JMAIT, 2018, Vol. 3, No 3, pp. 21-26, ISSN 2466-3603
() Report from the meeting of the national importance printed in its entirety
Baranovski I., Stankovski S., Ostojić G., Oros D., Horvat S.: Software support for self-service automated systems (Softverska podrška samouslužnim automatizovanim sistemima), 17. Međunarodni naučno-stručni simpozijum INFOTEH-JAHORINA, Jahorina: University of East Sarajevo, Faculty of Electrical Engineering, 21-23 Mart, 2018, pp. 1-6, ISBN 978-1-5386-4907-7, UDK: IEEE Catalog Number: CFP18JAH-ART
() Report from the meeting of the national importance printed in its entirety
Tarjan L., Šenk I., Horvat S., Oros D., Baranovski I.: Holovi senzori u zadacima beskontaktnog određivanja pozicije kod pravolinijskog kretanja predmeta rada u proizvodnom procesu, 16. Međunarodni naučno-stručni simpozijum INFOTEH-JAHORINA, Jahorina: Elektrotehnički fakultet Istočno Sarajevo, Srpsko Sarajevo, Republika Srpska, 22-24 Mart, 2017, pp. 453-457, ISBN 978-99976-710-0-4
() Report from the meeting of the national importance printed in its entirety
Stankovski S., Mihajlov S., Baranovski I., Oros D., Tarjan L.: Hvataljka za prenos malog tereta kod bespilotnih letelica, 15. Međunarodni naučno-stručni simpozijum INFOTEH-JAHORINA, Jahorina: Elektrotehnički fakultet Istočno Sarajevo, Srpsko Sarajevo, Republika Srpska, 16-18 Mart, 2016, pp. 848-853, ISBN 978-99955-763-9-4
() Report from the meeting of the national importance printed in its entirety
Đukić N., Tejić B., Tarjan L., Šenk I., Oros D.: Primena objektno orijentisane paradigme u industrijskoj automatizaciji kroz standard IEC 61131, 13. Međunarodni naučno-stručni simpozijum Infoteh-Jahorina, Jahorina: Elektrotehnički fakultet Istočno Sarajevo, Srpsko Sarajevo, Republika Srpska, 19-21 Mart, 2014, pp. 643-647, ISBN 978-99955-763-3-2
() Report from the meeting of the national importance printed in its entirety
Tarjan L., Šenk I., Oros D., Horvat S., Tegeltija S.: Mogućnosti primene FPGA za unapređenje industrijskih upravljačkih sistema, 13. Međunarodni naučno-stručni simpozijum Infoteh-Jahorina, Jahorina: Elektrotehnički fakultet Istočno Sarajevo, Srpsko Sarajevo, Republika Srpska, 19-21 Mart, 2014, pp. 571-575, ISBN 978-99955-763-3-2
() Report from the meeting of the national importance printed in its entirety
Stankovski S., Oros D., Ostojić G., Tarjan L., Radić M.: Analiza hvatanja etiketa na IML robotima, 8. Međunarodni naučno-stručni simpozijum INFOTEH-JAHORINA, Jahorina: Elektrotehnički fakultet, Istočno Sarajevo, Republika Srpska, BiH, 18-20 Mart, 2009, pp. 810-813, ISBN 99938-624-2-8
() Report from the meeting of the national importance printed in its entirety
Nikoličić S., Oros D., Stankovski S.: Šta nude RFID tehnologije u logistici , 7. Međunarodni naučno-stručni skup o dostignućima elektro i mašinske industrije - DEMI, Banja Luka: Univerzitet u Banjaluci, Mašinski fakultet, 27-28 Maj, 2005, pp. 645-651
() Defended Doctoral dissertation
Одређивање параметара корелације избора актуатора и времена циклуса производње, Факултет техничких наука, Универзитет у Новом Саду, Нови Сад, 2014
() New product or technology introduced in the production - international level
Oros D., Baranovski I., Stankovski S., Ostojić G., Šiposki A.: Automat za nagradne igre kupaca sa fiskalnim računima, 2017
() New product or technology introduced in the production - international level
Oros D., Baranovski I., Stankovski S., Ostojić G., Červeni B., Milosavljević M.: Manipulator za izuzimanje i slaganje upijača u plastične posude, 2013
() New product or technology introduced in the production - international level
Baranovski I., Oros D., Stankovski S., Ostojić G., Oros P., Šiposki A.: Manipulator za izuzimanje i slaganje plastičnih posuda, 2013
() Significantly improved existing product or technology
Stankovski S., Tegeltija S., Ostojić G., Tejić B., Oros D., Milosavljević M.: Sistem za nadzor prisustnosti vozila na parking prostoru na bazi bežičnih senzorskih mreža, 2016
() Significantly improved existing product or technology
Beg I., Baranovski I., Oros D., Ostojić G., Stankovski S., Milosavljević M.: Uređaj za overavanje opštih uplatnica u bankarskim kioscima, 2015
