PhD Sanja Kojić (female) is an Assistant Professor at the Faculty of Technical Sciences (FTS), University of Novi Sad (UNS), Serbia. She received an MSc degree in 2010, and a PhD degree in 2022 from FTS-UNS, in electrical engineering. Author of over 70 articles, including over 30 in leading peer-reviewed journals with impact factors and two patents. Her scientific papers have been cited 260 times and her h-index is 8. Her areas of research cover microfluidics, flexible, printed and green electronics, mechanical and microscopic characterisation, and archaeology. Dr Kojić has more than ten years of work experience on national and international projects (Horizon Europe, H2020, FP7, ERASMUS, TEMPUS, EUREKA, COST, NATO). She was proclaimed the assistant with the largest number of scientific papers: at the Department of Energy, Electronics and Telecommunications in 2018 and at the Department of Electronics in 2019. While in 2023, she was recipient of the annual award of the Faculty of Technical Sciences for the achieved result in scientific and research work. She runs a volunteering program at Engineering Creativity Center of the University of Novi Sad, where students can get access and training to the newest fabrication equipment for the textile, flexible and printed electronics as well as microfluidic chips. She is the mother of a girl.
() Researches published in the journals of the international importance
Radović M., Dubourg G., Kojić S., Dohčević-Mitrović Z., Stojadinović B., Bokorov M., Crnojević-Bengin V.: Laser sintering of screen-printed TiO2 nanoparticles for improvement of mechanical and electrical properties, Ceramics International, 2018, Vol. 44, No 9, pp. 10975-10983, ISSN 0272-8842
() Researches published in the journals of the international importance
Wagle S., Kovačević B., Walker D., Ionescu C., Shah U., Stojanović G., Kojić S., Mooranian A., Al-Salami H.: Alginate-based drug oral targeting using bio-micro/nano encapsulation technologies, Expert Opinion on Drug Delivery, 2020, Vol. 17, No. 10, pp. 1361-1376, ISSN 1744-7593
() Researches published in the journals of the international importance
Erceg T., Vukić (Skerlić) N., Šovljanski O., Teofilović V., Porobić S., Baloš S., Kojić S., Terek P., Banjanin B., Rakić S.: Preparation and characterization of biodegradable cellulose acetate-based films with novel plasticizer obtained by polyethylene terephthalate glycolysis intended for active packaging, Cellulose, 2023, ISSN 0969-0239
() Research published in the top international journal
Stojanović G., Radovanović M., Kojić S., Milić L., Simić M., Kojić T., Georges Duval R., Vukmirović J., Petrović B.: Temperature sensors manufactured from edible materials intended for oral cavity operation, International Journal of Precision Engineering and Manufacturing-Green Technology, 2023, ISSN 2198-0810
() Research published in the top international journal
Petrović B., Kojić S., Milić L., Luzio A., Perić T., Marković E., Stojanović G.: Toothpaste ingestion-evaluating the problem and ensuring safety: systematic review and meta-analysis, Frontiers in Public Health, 2023, Vol. 11, pp. 1-12, ISSN 2296-2565
() Research published in the top international journal
Popović Ž., Thiha A., Ibrahim F., Petrović B., Dahlan N., Milić L., Kojić S., Stojanović G.: Oral micro‑electronic platform for temperature and humidity monitoring, Scientific Reports, 2023, Vol. 13, No. 21277, pp. 1-12, ISSN 2045-2322
() Research published in the top international journal
Kovacevic B., Raj Wagle S., Mihaela Ionescu C., Jones M., Lewkowicz M., YM Wong E., Kojić S., Stojanović G., Đanić (Stojančević) M., Mikov M., Mooranian A., Al-Salami H.: Novel hydrogel comprising non-ionic copolymer with various concentrations of pharmacologically active bile acids for cellular injectable gel, Colloids and surfaces B: Biointerfaces, 2023, Vol. 222, pp. 1-11, ISSN 0927-7765
() Research published in the top international journal
Anisa Dahlan N., Thiha A., Ibrahim F., Milić L., Muniandy S., Fauzani Jamaluddin N., Petrović B., Kojić S., Stojanović G.: Role of Nanomaterials in the Fabrication of bioNEMS/MEMS for Biomedical Applications and towards Pioneering Food Waste Utilisation, Nanomaterials, 2022, Vol. 12, No. 22, pp. 1-41, ISSN 2079-4991
() Research published in the top international journal
Radovanović M., Stojanović G., Simić M., Suvara D., Milić L., Kojić S., Škrbić B.: Edible Electronic Components Made from Recycled Food Waste, Advanced Electronic Materials, 2024, No. 2300905, pp. 1-13, ISSN 2199-160X
() Research published in the top international journal
Kojić S., Stojanović G., Radonić V.: Novel Cost-Effective Microfluidic Chip Based on Hybrid Fabrication and Its Comprehensive Characterization, Sensors, 2019, Vol. 19, No 7, pp. 1-18, ISSN 1424-8220
() Research published in the top international journal
Jovanović N., Petrović B., Kojić S., Šipovac M., Marković D., Stefanović S., Stojanović G.: Primary Teeth Bite Marks Analysis on Various Materials: A Possible Tool in Children Health Risk Analysis and Safety Assessment, International Journal of Environmental Research and Public Health, 2019, Vol. 16, No 13, pp. 1-12, ISSN 1660-4601
() Research published in the top international journal
Bobić Z., Kojić S., Stojanović G., Terek V., Kovačević L., Terek P.: Nanotopography Evaluation of NiTi Alloy Exposed to Artificial Saliva and Different Mouthwashes, Materials, 2022, Vol. 15, No. 23, pp. 8705-8705, ISSN 1996-1944
() Research published in the top international journal
Qureshi S., Milić L., Petrović B., Vejin M., Kojić S., Jarić S., Stojanović G.: The Measurement of Contact Angle, pH, and Conductivity of Artificial Saliva and Mouthwashes on Enamel, Glass-Ionomer, and Composite Dental Materials, Materials, 2022, Vol. 15, No. 13, pp. 1-15, ISSN 1996-1944
() Research published in the top international journal
Petrović B., Stilinović N., Tomas Petrović A., Kojić S., Stojanović G.: Determination of salivary concentrations of leptin and adiponectin, ability to reduce ferric ions and total antioxidant capacity of saliva in patients with severe early childhood caries, Frontiers in Pediatrics, 2022, ISSN 2296-2360
() Research published in the prominent international journal
Stojanović G., Pojić M., Kojić S., Mišan A., Vasiljević D.: Mechanical properties of edible biofilm as a substrate for printed electronics, Applied Physics. A: Materials Science and Processing, 2019, Vol. 125, No 576, ISSN 0947-8396
() Research published in the prominent international journal
Samae M., Ritmetee P., Chirasatitsin S., Kojić S., Kojić T., Jevremov J., Stojanović G., Al Salami H.: Precise manufacturing and performance validation of paper-based passive microfluidic micromixers, International Journal of Precision Engineering and Manufacturing, 2019, ISSN 2234-7593
() Research published in the prominent international journal
Radovanović M., Kojić S., Vasiljević D., Stojanović G.: Characterization of LC sensor structures realized by PCB and LTCC technology for determining moisture in building materials, Processing and Application of Ceramics, 2018, Vol. 12, No 1, pp. 13-20, ISSN 1820-6131
() Research published in the prominent international journal
Stefanović S., Petrović B., Porčić M., Penezić K., Pendić J., Dimitrijević V., Živaljević I., Vuković S., Jovanović J., Kojić S., Starović A., Blagojević T.: Bone spoons for prehistoric babies: detection of human teeth marks on the Neolithic artefacts from the site Grad-Starčevo (Serbia), PLOS ONE, 2019, Vol. 14, No 12, pp. 1-38, ISSN 1932-6203
() Research published in the prominent international journal
Vukmirović J., Tripković Đ., Bajac B., Kojić S., Stojanović G., Srdić V.: Comparison of barium titanate thin films prepared with inkjet printing and spin coating, PROCESSING and APPLICATION of CERAMICS, 2015, Vol. 9, pp. 151-156, ISSN 1820-6131
() Research published in the prominent international journal
Stavrakis A., Kojić S., Petrović B., Nešković (Marković) I., Stojanović G.: Performance Evaluation of Dental Flosses Pre- and Post-Utilization, Materials, 2022, Vol. 15, No. 4, pp. 1-14, ISSN 1996-1944
() Research published in the prominent international journal
Đoc´osˇ M., Aung T., Vejin M., Movrin D., Fauzani Jamaluddin N., Kojić S., Petrović B., Ibrahim F., Stojanović G.: Analysis of Covarine Particle in Toothpaste Through Microfluidic Simulation, Experimental Validation, and Electrical Impedance Spectroscopy, ACS Omega, 2024, Vol. 2024, ISSN 2470-1343
() Research published in the international journal
Thamphiwatana S., Phairatana T., Chirasatitsin S., Samae M., Velvé Casquillas G., Al-Salami H., Kojić S., Stojanović G.: A microfuidic micromixer fabricated using polydimethylsiloxane-based platform for biomedical applications, MIDEM - Journal of microelectronics, electronic components and materials, 2018, Vol. 48, No 3, pp. 173-179, ISSN 0352-9045, UDK: 621.3:(53+54+621+66)
() Research published in the international journal
Stojanović G., Lečić N., Kojić S., Vasiljević D.: Characterization of customized ferrite cores for a compact six-phase coupled inductor, International Journal of Applied Electromagnetics and Mechanics, 2018, Vol. 57, pp. 19-27, ISSN 1383-5416
() Research published in the international journal
Kojić S., Ajkalo S., Gužvica M., Vasiljević D., Radovanović M., Stojanović G.: A Counter of Number of Products on the Shelf – Influences on Capacitance of Interdigitated Capacitor with Application in Intelligent Packaging, Informacije MIDEM - Journal of microelectronics, electronic components and materials, 2014, Vol. 44, No 4, pp. 321-329, ISSN 0352-9045, UDK: 621.3:(53 54 621 66)
() Research published in the journal of the international importance verified by the special resolution
Petrović B., Marković E., Perić T., Kojić S.: Challenges in Experimental Evaluation of Morphological, ChemoMechanical and Adhesive Properties of Glass-ionomer Based Dental Materials , Advanced Technologies and Materials, 2019, Vol. 44, No 2, pp. 25-30, ISSN 2620-0325
() Collection of the International scientific conferences
Sanja Kojić, Srđan Ajkalo, Miloš Gužvica, Dragana Vasiljević, Milan Radovanović, Goran M. Stojanović "Influence of the Position of Electrodes on Capacitance of Interdigitated Capacitor Fabricated on Flexible Foil", INDEL 2012
() Report from the international meeting printed in its entirety
Đoćoš M., Brdar S., Vejin M., Petrović B., Milić L., Kojić S.: A Python-based Pipeline for Processing and Plotting Automatisation of Nanoindentation Data: Plotting with GraphPad Prism software, 21. International Symposium INFOTEH-JAHORINA (INFOTEH), Jahorina, 16-18 March, 2022, pp. 1-4
() Report from the international meeting printed in its entirety
Kojić S., Ajkalo S., Gužvica M., Vasiljević D., Radovanović M., Stojanović G.: Influence of the position of the electrodes on capacitance of interdigitated capacitor fabricated on flexible foil, 8. International Symposium on Industrial Electronics (INDEL), Banja Luka, 4-6 Novembar, 2010, pp. 308-312, ISBN 987-99955-46-14-4
() Report from the international meeting printed in its entirety
Vasiljević D., Kojić S., Pivaš B., Medić D., Tadić A., Mirković S., Radovanović M.: Cost-effective interdigitated capacitive sensors for efficient bacteria detection, 15. Infoteh-Jahorina, Jahorina, 16-18 Mart, 2016, pp. 11-14, ISBN 978-99955-763-9-4
() Report from the international meeting printed in its entirety
Žlebič Č., Kisić M., Blaž N., Menićanin A., Živanov Lj., Damnjanović M., Kojić S.: Ink-jet printed strain sensor on polyimide substrate, 36. International Spring Seminar on Electronics Technology, Alba Iulia, 8-12 Maj, 2013, pp. 409-414
() Report from the international meeting printed in extracts
Dubourg G., Kojić S., Matović J., Crnojević-Bengin V.: Rapid fabrication of paperbased MEMS strain sensor using a laser micromachining process, 12. Micro and Nano Engineering, Hague, 2015
() Report from the international meeting printed in extracts
Tripković Đ., Vukmirović J., Bajac B., Kojić S., Mojić B., Stojanović G., Srdić V.: Characterization of BaTiO3 films fabricated by ink-jet printing process, 10. Students’ Meeting, Processing and Application of Ceramics, Novi Sad, 6-9 Novembar, 2013, pp. 43-43
() Invited lectures from the meeting of the national importance printed in its entirety
Kojić S., Stojanović G., Vasiljević D., Samardžić N.: Mogućnosti ink-jet štampane elektronike, 1. International Scientific Conference "Metrology and Quality in Production Engineering and Environmental Protection" - ETIKUM, Novi Sad, 12-13 Jun, 2013, pp. 35-38, ISBN 978-86-7892-512-2
() Report from the meeting of the national importance printed in its entirety
Kojić S., Bednar N., Vasiljević D., Radovanović M., Samardžić N.: Merenje i kontrola materijala u nanotehnologijama, 1. International Scientific Conference "Metrology and Quality in Production Engineering and Environmental Protection" - ETIKUM, Novi Sad, 12-13 Jun, 2013, pp. 27-30, ISBN 978-86-7892-512-2
() Realized patent, breed, sort or race, architectural, civil and urban original work
Kojić S., Ajkalo S., Stojanović G., Gužvica M., Vasiljević D., Radovanović M.: Metod i sistem za senzorski podržano inteligentno praćenje stanja objekta na polici, Beograd, Glasnik intelektualne svojine, 2014, str. 18-19, ISBN 2217-9143
