() Research published in the prominent international journal
Vučković M., Popović V., Jerkan D., Jarić M., Banović M., Vasić V., Marčetić D.: Nonlinear Magnetic Model of IPMSM Based on the Frozen Permeability Technique Utilized in Improved MTPA Control, Electronics (Basel), 2024, Vol. 13, No. 4, pp. 1-21, ISSN 2079-9292
() Research published in the prominent international journal
Vučković M., Popović V., Oros Đ., Vasić V., Marčetić D.: Low Voltage Induction Motor Traction Drive Self-Commissioning Technique with the Advanced Measured Signal Processing Procedure, Energies, 2021, Vol. 14, No. 6, pp. 1-18, ISSN 1996-1073
() Research published in the prominent international journal
Popović V., Oros Đ., Vasić V., Marčetić D.: Tuning the rotor time constant parameter of IM using the minimum order recursive linear Least square estimator, IET Electric Power Applications, 2018, ISSN 1751-8660
() Report from the international meeting printed in its entirety
Marčetić D., Popović V., Matić P.: Simple procedure for self-commissioning of IM drive, Electronics, 2018, ISSN 1450-5843, 12. International Symposium on Industrial Electronics (INDEL), Banja Luka: Elektrotehnicki fakultet Banja Luka, 1-3 Novembar, 2018, ISBN 978-1-5386-2353-4
() Report from the international meeting printed in its entirety
Jarić M., Popović V., Vučković M., Marčetić D., Jerkan D.: Comparison of Optimal Control Trajectories of IPMSMs with Different Saliency Ratios, 22. International Symposium POWER ELECTRONICS Ee, Novi Sad, 25-28 October, 2023, ISBN 979-8-3503-4317-5
() Report from the international meeting printed in its entirety
Popović V., Oros Đ., Marčetić D.: MAPT strategy of IM Including Iron Loss Phenomena, IEEE Xplore, 2020, Vol. 1, No. 1, pp. 1-5, 13. International Symposium on Industrial Electronics and Applications (INDEL), Banja Luka: Faculty of Electrical Engineering University of Banja Luka, 4-6 November, 2020, pp. 1-5, ISBN 978-1-7281-9863-7
() Report from the international meeting printed in its entirety
Popović V., Vujkov B., Vučković M., Vasić V., Marčetić D., Oros Đ.: MAPT strategy for IPMSM with parameter sensitivity analysis, IEEE Xplore, 2020, Vol. 1, No. 1, pp. 1-5, 13. International Symposium on Industrial Electronics and Applications (INDEL), Banja Luka: Faculty of Electrical Engineering University of Banja Luka, 4-6 November, 2020, pp. 1-5, ISBN 978-1-7281-9863-7
() Report from the international meeting printed in its entirety
Popović V., Gecić M., Todorović I., Oros Đ., Marčetić D.: Sensorless Control of Synchronous Reluctance Drive Based on Extended Back Electromotive Force Model, IEEE Xplore, 2016, Vol. 1, No. 1, pp. 1-6, 11. INDEL, Banja Luka: Elektrotehni;ki fakultet Banja Luka, 3-5 November, 2016, pp. 1-6, ISBN 978-1-5090-2329-5
() Research published in the journal of the national importance
Popović V., Matić P., Marčetić D.: Influence of the Resolver Position Estimation Error on the PMSM Vector Controlled Drive Performance, Journal of Mechatronics, Automation and Identification Technology – JMAIT, 2021, Vol. 6, No. 2, pp. 6-10, ISSN 2466-3603
() Research published in the scientific journal
Jarić M., Popović V.: IMC based current control of induction motors, Zbornik radova Fakulteta tehničkih nauka, 2022, Vol. 37, No. 11, pp. 1949-1952, ISSN 0350-428X, UDK: 621.31
() Report from the meeting of the national importance printed in its entirety
Popović V., Simić S., Rajs V., Marčetić D.: Uporedna analiza naprednih algoritama za optimizaciju kapaciteta električni moment-struja sinhronog motora sa utisnutim stalnim magnetima , 21. International Symposium INFOTEH-JAHORINA (INFOTEH), Jahorina: Univerzitet u Istočnom Sarajevu, Elektrotehnički fakultet, 16-18 Mart, 2022, pp. 33-38, ISBN 978-99976-710-9-7
() Report from the meeting of the national importance printed in its entirety
Popović V., Gecić M., Oros Đ., Marčetić D.: Tehnike rekonstrukcije faznih struja u pogonu sa šantom u jednosmernom međukolu invertora, 14. Međunarodni naučno-stručni simpozijum INFOTEH-JAHORINA, Jahorina: Elektrotehnički fakultet, Istočno Sarajevo, 18-20 Mart, 2015, pp. 203-207, ISBN 978-99955-763-6-3
() Report from the meeting of the national importance printed in its entirety
Popović V., Gecić M., Oros Đ., Kulić F., Marčetić D.: Projektovanje strujnog kontrolera DC-DC pretvarača pogodnog za regulaciju momenta histerezisne kočnice, 16. Infoteh-Jahorina, Jahorina: Univerzitet u Istočnom Sarajevu, Elektrotehnički fakultet, 22-24 Mart, 2017, pp. 1-6, ISBN 978-99976-710-0-4
() Report from the meeting of the national importance printed in its entirety
Popović V., Kukić M., Oros Đ., Varga R., Marčetić D.: Optimalno upravljanje asinhronom mašinom u pogonu električnih vozila, 1. Energetska efikasnost ENEF, Banja Luka: Univerzitet u Banjoj Luci, Elektrotehnički fakultet, 25-26 Septembar, 2015, pp. 49-55, ISBN 978-99955-46-27-4
() New product or technology introduced in the production - international level
Marčetić D., Popović V., Gecić M., Oros Đ.: Neregenerativno kočenje asinhronog motora bez davača na vratilu kontrolisanog naponskim i strujnim invertorom (Non-regenerative braking for shaft-sensorless induction motor controlled by both voltage and current source inverter), rađeno za NIDEC motor company, St. Louis, USA., 2015
() New product or technology introduced in the production - international level
Marčetić D., Popović V., Gecić M., Oros Đ.: Upravljanje asinhronim motorom bez davača na vratilu koji je kontrolisan sa naponskim i sa strujnim invertorom (Shaft-sensorless control of induction motor supplied by both voltage and current source inverter), rađeno za NIDEC motor company, St. Louis, USA., 2015
() Prototype, new methods, software, standardized and certified instrument
Marčetić D., Popović V., Gecić M., Oros Đ., Vasić V.: Rekonstrukcija faznih struja asinhrone mašine u vektorski upravljanom pogonu koji poseduje minimalni broj strujnih senzora, 2015
