PRILAZ ISTRAŽIVANJU I DEFINISANJU MODELA ZA PRORAČUN PROTICANJA ČVRSTIH ČESTICA SA ULJNOM MASOM KROZ ZAZORE U FUNKCIJI KONSTRUKCIONO RADNIH PARAMETARA HIDRAULIČNIH KOMPONENATA
() Researches published in the journals of the international importance
Orošnjak M., Jocanović M., Čavić M., Karanović V., Penčić M.: Industrial Maintenance 4(.0) Horizon Europe: Consequences of the Iron Curtain and Energy-Based Maintenance, Journal of Cleaner Production, 2021, Vol. 314, pp. 1-16, ISSN 0959-6526
() Research published in the prominent international journal
Duđak Lj., Milisavljević S., Jocanović M., Kiš (Kiss) F., Šević D., Karanović V., Orošnjak M.: Life Cycle Assessment of Different Waste Lubrication Oil Management Options in Serbia, Applied Sciences, 2021, ISSN 2076-3417
() Research published in the prominent international journal
Nikolić N., Antonić Ž., Dorić J., Ružić D., Galamboš S., Jocanović M., Karanović V.: An Analytical Method for the Determination of Temperature Distribution in Short Journal Bearing Oil Film, Symmetry, 2020, Vol. 12, No. 4, pp. 1-19, ISSN 2073-8994
() Research published in the prominent international journal
Jocanović M., Agarski B., Karanović V., Orošnjak M., Ilić Mićunović M., Ostojić G., Stankovski S.: LCA/LCC Model for Evaluation of Pump Units in Water Distribution Systems, Symmetry, 2019, Vol. 11, No. 9, pp. 1-21, ISSN 2073-8994
() Research published in the prominent international journal
Jocanović M., Šević D., Karanović V., Beker I., Dudić S.: Increased Efficiency of Hydraulic Systems Trough Reliability Theory and Monitoring of System Operating Parameters, Strojniski vestnik - Journal of Mechanical Engineering, 2012, Vol. 58, No 4, pp. 281-288, ISSN 0039-2480
() Research published in the international journal
Orošnjak M., Jocanović M., Gvozdenac Urošević B., Šević D., Duđak Lj., Karanović V.: Bus Fleet Management: A Systematic Literature Review, Promet - Traffic and Transportation, 2020, Vol. 32, No. 6, pp. 761-772, ISSN 0353-5320
() Research published in the international journal
Karanović V., Jocanović M., Baloš S., Knežević D., Mačužić I.: Impact of Contaminated Fluid on the Working Performances of Hydraulic Directional Control Valves, Strojniski vestnik - Journal of Mechanical Engineering, 2019, Vol. 65, No. 3, pp. 139-147, ISSN 0039-2480
() Research published in the international journal
V.Karanović, M.Jocanović, V.Jovanović: Review of Development Stages in the Conceptual Design of an Electro-Hydraulic Actuator for Robotics, Acta Polytechnica Hungarica, 2014, Vol. 11, No. 5, pp. 59-79, UDK: 621.643, ISSN 1785-8860
() Research published in the international journal
V. Savić, D. Knežević, D. Lovrec, M. Jocanović, Velibor Karanović: Determination of Pressure Losses in Hydraulic Pipeline Systems by Considering Temperature and Pressuer, Strojšnik Vestnik-Journal of Mechanical Engineering, 2009, Vol. 55, No. 4, str.237-243, UDK: 621.643, ISSn 0039-2480
() Research published in the journal of the international importance verified by the special resolution
Knežević D., Milovanović Z., Milašinović A., Jocanović M.: Determination of the Flow Rate Through Long Radial Clearances Inside Hydraulic Components, Engineering and Automation Problems, International Journal, 2012, Vol. 1, No 2, pp. 23-31, ISSN 0234-6206, UDK: 532
() Invited lectures from the international meeting printed in its entirety
Duđak Lj., Jocanović M., Tanasić Z.: The Impact of Globalization on Human Resource Management, 5. 5th International Scientific Conference: Corporations as multidimensional actors/entities, Novi Sad: FTN Novi Sad , 9 November, 2019, ISBN 978-86-6022-234-5
() Invited lectures from the international meeting printed in its entirety
Savić V., Karanović V., Jocanović M., Knežević D.: Pressure drop in hydraulic pipeline system - Identification of real basis for calculation of mineral hydraulic oil flow, Fluidna tehnika, 2009, Vol. 5, pp. 133-148, ISSN 0353-6114, 5. Fluid Power, Maribor: Mašinski fakultet univerziteta u Mariboru, 17-18 Septembar, 2009, pp. 133-148, ISBN 978-961-248-176-6, UDK: 621.51/.54(063)(082)
() Invited lectures from the international meeting printed in extracts
Jocanović M., Dušan B., Karanović V., Geaverts R.: Industrial Aplication of Automatic Lubrication Systems, 6. Fluid Power, Maribor: Univerzitet v Maribor, Fakultet za strojništvo, 15-16 Septembar, 2011, pp. 409-418, ISBN 978-961-248-290-9, UDK: 621.51/54 (082), 681.523 (082)
() Report from the international meeting printed in its entirety
Lukić D., Antić A., Borojević S., Jocanović M., Kuric I.: Evaluation of the technological effects of application of the FMS elements, IOP Conference Series: Materials Science and Engineering, 2020, Vol. 749, pp. 12-18, ISSN 1757-8981, 12. INTERNATIONAL CONFERENCE OF THE CARPATHIAN EURO-REGION SPECIALISTS IN INDUSTRIAL SYSTEMS, Baia Mare: IOP Publishing, 11-12 April, 2019, pp. 12-18
() Report from the international meeting printed in its entirety
Jocanović M., Karanović V., Orošnjak M., Lukić D., Hadžistević M.: PROTECT WORKERS IN THE WORKING ENVIRONMENT OF THE SAW BLADE , 14. International Conference on Accomplishments in Mechanical and Industrial Engineering - DEMI, Banja Luka: University of Banja Luka, Faculty of Mechanical Engineering, 24-25 May, 2019, pp. 651-656, ISBN 978-99938-39-85-9, UDK: 621(082)(0.034.2) 621.3(082)(0.034.2) 007(082)(0.034.2)
() Report from the international meeting printed in its entirety
Jocanović M., Karanović V., Orošnjak M., Nikolić N., Selinić D.: Comparison of Mobile Machine Oil Diagnostics Results by Standard and OTC - Kittiwake Correlation Method, Fluidna tehnika, 2019, Vol. 1, No. 1, pp. 295-307, ISSN 0353-6114, 10. International Conference Fluid Power, Maribor: University of Maribor Press Slomškov trg 15, 2000 Maribor, Slovenia , 19-20 September, 2019, pp. 295-307, ISBN 978-961-286-300-5
() Report from the international meeting printed in its entirety
Karanović V., Jocanović M., Wakiru J., Orošnjak M.: Benefits of lubricant oil analysis for maintenance decision support: A case study, 10. Simpozijum o konstruisanju, oblikovanju i dizajnu – KOD, Novi Sad: Faculty of Technical Sciences, 6-8 June, 2018
() Report from the international meeting printed in its entirety
Nikolić N., Antonić Ž., Dorić J., Jocanović M.: INFLUENCE OF LOAD AND OIL VISCOSITY ON STRIBECK CURVE SHAPE FOR LONG JOURNAL BEARING, 9. International Conference on Innovative Technologies IN-TECH, Zagreb: Faculty of Engineering, University of Rijeka, 5-7 September, 2018, pp. 13-16
() Report from the international meeting printed in its entirety
Wakiru J., Pintelon L., Karanović V., Jocanović M., Orošnjak M.: Analysis of lubrication oil towards maintenance grouping for multiple equipment using fuzzy cluster analysis, 10. Simpozijum o konstruisanju, oblikovanju i dizajnu – KOD, Novi Sad: Faculty of Technical Sciences, 6-8 June, 2018
() Report from the international meeting printed in its entirety
Jocanović M., Karanović V., Orošnjak M., Lukić D., Wakiru J.: Impact of exploitation conditions on the types of wear of the excavator slew bearing toothed race , IOP Conference Series: Materials Science and Engineering, 2018, No. 393, pp. 1-10, ISSN 1757-8981, 10. Simpozijum o konstruisanju, oblikovanju i dizajnu – KOD, Novi Sad: University of Novi Sad, Faculty of Technical Sciences, 6-8 June, 2018, pp. 1-10, ISBN 1757-8981
() Report from the international meeting printed in its entirety
Karanović V., Andrić S., Jocanović M., Orošnjak M., Bugarić U.: Importance of offline filtration system use, 13. International Scientific Conference "Flexible Technologies" - MMA, Novi Sad: Faculty of Technical Sciences, 28-29 September, 2018, ISBN 978-86-6022-094-5, UDK: 621.7/.9(082); 621.9(082)
() Report from the international meeting printed in its entirety
Karanović V., Jocanović M., Orošnjak M.: Active tribology systems, 15. International Conference on Tribology - SERBIATRIB, Kragujevac: University of Kragujevac, Faculty of Engineering and Serbian Tribology Society, 17-19 May, 2017, pp. 378-381, ISBN 978-86-6335-041-0, UDK: 621.89(082); 531.43(082); 66.017/018:539.375.6(082); 577.38(082); 612.766(082)
() Report from the international meeting printed in its entirety
Jocanović M., Karanović V., Knežević D., Orošnjak M., Laloš S.: SIGNIFICANCE OF HYDRAULIC SYSTEM WORKING FLUID MAINTENANCE WITH INTEGRATED LOGIC AND BUILT-IN COMPONENTS, 13. International Conference on Accomplishments in Mechanical and Industrial Engineering - DEMI, Banja Luka: University of Banja Luka, Faculty of Mechanical Engineering, 26-27 May, 2017, pp. 855-862, UDK: 621.3(082)(0.034.2); 621(082)(0.034.2); 004(082)(0.034.2)
() Report from the international meeting printed in its entirety
Orošnjak M., Peković T., Jocanović M., Karanović V., Novak Horvatić A.: Using contamination control in condition based maintenance of a hydraulic system, 42. Scientific Conference Maintenance of Machinery and Equipment - OMO, Budva, 24-27 May, 2017, pp. 102-111
() Report from the international meeting printed in its entirety
Orošnjak M., Karanović V., Horvatić Novak A., Peković T., Jocanović M.: Maintenance of a hydraulic system through oil monitoring and contamination control, 16. International Scientific Conference on Production Engineering - CIM, Zadar: Croatian Association of Production Engineering, 8-10 June, 2017, pp. 195-202, ISBN 2584-3214
() Report from the international meeting printed in its entirety
Karanović V., Jocanović M., Orošnjak M.: Condition Monitoring of Hydraulic Machinery by Oil Analysis, 8. PSU-UNS International Conference on Engineering and Technology - ICET, Novi Sad: University of Novi Sad, Faculty of Novi Sad, 8-10 June, 2017, ISBN 978-86-7892-934-2, UDK: 62(082)
() Report from the international meeting printed in its entirety
Jocanović M., Karanović V., Tič V., Orošnjak M., Selinić D.: Application of hydraulic and gear oils in the food processing industry, Fluidna tehnika, 2017, Vol. 2, pp. 111-119, ISSN 0353-6114, 8. International Conference Fluid Power, Maribor: University of Maribor, Faculty of Mechanical Engineering, 14-15 September, 2017, pp. 111-119, ISBN 978-961-286-085-8.11, UDK: 621.22(082)
() Report from the international meeting printed in its entirety
Orošnjak M., Jocanović M., Karanović V.: Simulation and Modeling of a Hydraulic System in FluidSim, 17. International Scientific Conference on Industrial Systems, Novi Sad: University of Novi Sad, Faculty of Technical Sciences, Department for Industrial Engineering and Management, 4-6 October, 2017, pp. 50-53, ISBN ISBN 978-86-7892-978, UDK: 658.5(082)
() Report from the international meeting printed in its entirety
Orošnjak M., Jocanović M., Karanović V.: Quality Analysis of Hydraulic Systems in Function of Reliability Theory, 27. DAAAM International Symposium on Intelligent Manufacturing and Automation, Mostar: Danube Adria Association for Automation and Manufacturing, DAAAM, 26-29 October, 2016, pp. 569-577, ISBN 17269679, UDK: DOI: 10.2507/27th.daaam.proceedings.084
() Report from the international meeting printed in its entirety
Jocanović M., Karanović V., Orošnjak M., Nikolić N., Knežević D.: Lubricating oils for modern automatic transmission of motor vehicles, 3. International Scientific Conference "Conference on Mechanical Engineering Technologies and Applications" - COMETa, Jahorina, 7-9 Decembar, 2016, pp. 451-456, ISBN 978-99976-623-7
() Report from the international meeting printed in its entirety
Jocanović M., Karanović V., Veličković M.: DidacticEquipment for Education of Students in Automated Hydraulic Systems, 6. International Symposium on Industrial Engineering (SIE), Beograd: Faculty of Mechanical Engineering, Belgrade, 24-25 Septembar, 2015, pp. 114-117, ISBN 978-86-7083-864-2, UDK: 005.22(082), 658.5(082), 006.83:338.45(082)
() Report from the international meeting printed in its entirety
Jocanović M., Karanović V., Knežević D.: APPLICATION OF GEAR REDUCER OILS IN FOOD PROCESSING INDUSTRY, 11. International Conference on Accomplishments in Electrical and Mechanical Engineering and Information Technology - DEMI, Banja Luka: University of Banja Luka, faculty of Mechanical Engineering, 30-1 Maj, 2013, pp. 999-1004, ISBN 978-99938-39-45-301, UDK: 621.3(048), 621(048), 004(048)
() Report from the international meeting printed in its entirety
Jocanović M., Karanović V., Vukelić Đ., Knežević D., Kraišnik M.: Diagnostic Equipment for Examination Phisical and Chemical Characteristics of UTTO, Stoutractor Oils, 1. International Scientific Conference "Conference on Mechanical Engineering Technologies and Applications" COMETa, Istočno Sarajevo: University of East Sarajevo, Faculty of Mechanical Engineering, 28-30 Novembar, 2012, pp. 631-640, ISBN 978-99938-655-5-1
() Report from the international meeting printed in its entirety
Karanović V., Jocanović M., Knežević D., Kaišnik M.: Development of Electro-hydraulic Actuator for Robots, 1. International Scientific Conference "Conference on Mechanical Engineering Technologies and Applications" COMETa, Istočno Sarajevo: University of East Sarajevo, Faculty of Mechanical Engineering, 28-30 Novembar, 2012, ISBN 978-99938-655-5-1, UDK: 621.03(082)
() Report from the international meeting printed in its entirety
M. Jocanović, V. Savić, V. Karanović,: MODEL FOR TRANSLATION OF CLASSES OF PURITY OF OILS BETWEEN ISO 4406/99, NAS 1638-01 AND SAE AS 4059: D STANDARDS, 14. Međunarodna naučna konferencija INDUSTRIJSKI SISTEMI - IS"08, Novi Sad: Fakultet tehničkuh nauka - Novi Sad, 2-3 Oktobar, 2008, str. 391- 396, UDK: 685.5 (082), ISBN 978-86-7892-135-3.
() Report from the international meeting printed in its entirety
Lazarevic, M.; Ostojic, G.; Jocanovic, M.; Rakic Skokovic, M.; Cosic, I. Stankovski, S.: Product Disassembly Quality According to Sellection Scenario, DAAAM International Scientific Book, 2007, str. 53-56, ISSN 1726-9679, ISBN 3-901509-58-5.
() Report from the international meeting printed in its entirety
V.Savić, M. Jocanović, V. Karanović: BASIC CONSTRUCTION MODEL OF THE SYSTEM FOR PROTECTION OF FRUIT TREES FROM FROST BY ICE PROTECTIVE CRUST, 14. Međunarodna naučna konferencija INDUSTRIJSKI SISTEMI - IS"08, Novi Sad: Fakultet tehničkuh nauka - Novi Sad, 2-3 Oktobar, 2008, str. 129- 134, UDK: 685.5 (082), ISBN 978-86-7892-135-3.
() Report from the international meeting printed in its entirety
V.Savić, M. Jocanović.: DIAGNOSTIC OF INDUSTRIAL AND MOTOR OILS OF THE FIRST DEGREE CORRELATION OF THE EXAMINATION RESULTS WITH STANDARD AND ELECTRO-CHEMICAL METHOD KITTIWAKE, XIII naučno-stručna konferencija INDUSTRIJSKI SISTEMI - IS "05, str.573 – 581, 07.-09.09.2005. H. Novi, SiCg, ISBN 86-7780-008-5, Fakultet tehničkih nauka, Novi Sad
() Report from the international meeting printed in its entirety
V. Savić, M. Jocanović, D.Knežević, M.Kraišnik; KINEMATICS OF DISTRIBUTION OF PRESSURE WITHIN PIPELINE OF TWO’LINE SYSTEMS FOR LUBRICATION, VII TH INTERNATIONAL SYMPOSIUM INTERTRIBO 2002, str. 141 – 143, Stara Lesna, Slovak Republic (2002),
() Report from the international meeting printed in its entirety
Orošnjak M., Jocanović M., Karanović V., Wakiru J., Bugarić U.: Contamination control of hydraulic systems in Industry 4.0, 3. Maintenance Forum on Maintenance and Asset Management, Beograd, 24-26 Maj, 2018, pp. 52-60, ISBN 978-86-84231-43-9
() Report from the international meeting printed in its entirety
Karanović V., Jocanović M., Wakiru J., Orošnjak M.: Benefits of lubricant oil analysis for maintenance decision support: A case study, 10. Simpozijum o konstruisanju, oblikovanju i dizajnu – KOD, Novi Sad: Faculty of Technical Sciences, 6-8 Jun, 2018
() Report from the international meeting printed in its entirety
Wakiru J., Pintelon L., Karanović V., Jocanović M., Orošnjak M.: Analysis of lubrication oil towards maintenance grouping for multiple equipment using fuzzy cluster analysis, 10. Simpozijum o konstruisanju, oblikovanju i dizajnu – KOD, Novi Sad: Faculty of Technical Sciences, 6-8 Jun, 2018
() Monograph of the national importance, monographic edition,
V.Savić, M.Jocanović, D.Jurišić: Motorna ulja - o uljima za podmazivanje motora sa unutrašnjim sagorevanjem, IKOS, Novi Sad, 2006.
() Monographic bibliographic publication
Jocanović M.: AUTOMATIZACIJA PROCESA RADA:Osnove hidrauličnog upravljanja, Novi Sad, Fakultet tehničkih nauka, 2014, str. 1-265, ISBN 978-86-7892-662-4
() Research published in the leading journal of the national importance
Jocanović M., Karanović V., Ivanišević A., Knežević D.: HYDRAULIC HAMMER EXCAVATOR FAILURE DUE TO SOLID PARTICLE CONTAMINATION, Vojnotehnički glasnik, 2014, Vol. 1, pp. 112-129, ISSN 0042-8469, UDK: 623+355/359
() Research published in the leading journal of the national importance
Jocanović M., Karanović V., Knežević D.: Application of Gear Oils in Food Processing Industry, Acta Technica Corviniensis, 2013, Vol. 1, No 7, pp. 171-174, ISSN 2067-3809
() Research published in the leading journal of the national importance
Knežević D., Laloš S., Jocanović M., Karanović V.: Effect of Bulk Modulus of Fluid on the Dynamic Behavior of the Hydraulic System, Annals of Faculty Engineering Hunedoara - International Journal of Engineering, 2016, Vol. 14, No 1, pp. 243-246, ISSN 1584-2665
() Research published in the leading journal of the national importance
Orošnjak M., Jocanović M., Karanović V., Vekić A., Medić N.: Transformation from mass production to mass customization in SCM: Obstacles and advantages, Acta Technica Corviniensis, 2017, Vol. 10, No 1, pp. 29-33, ISSN 2067-3809, UDK: http://acta.fih.upt.ro/pdf/2017-1/ACTA-2017-1-03
() Research published in the leading journal of the national importance
Ivanišević A., Jocanović M.: Economical Evaluation of the Project on Replacement of Heating Plant with Co-generation Heat and Power Plant by the end of 2030., Metalurgia international, 2013, Vol. 4, ISSN 1582-2214
() Research published in the leading journal of the national importance
Savić V., Šešlija D., Stankovski S., Jocanović M.: Trends in hydraulic and pneumatic automated systems, International Journal of Industrial Systems, 1999, Vol. 2, No. 1, pp. 53-58, ISSN 1450-7609
() Research published in the journal of the national importance
Karanović V., Jocanović M., Delić M.: Influence of solid particles as a contaminants on degradation processes in hydraulic components or systems, International Journal of Industrial Engineering and Management, 2015, Vol. 6, No. 1, pp. 15-20, ISSN 2217-2661, UDK: -
() Research published in the scientific journal
Vukelić Đ., Tadić B., Jocanović M., Lužanin O., Simeunović N.: A System for Computer-Aided Selection of Cutting Tools, Acta Technica Corviniensis, 2011, Vol. 4, No 4, pp. 89-92, ISSN 2067-3809
() Research published in the scientific journal
Karanović V., Jocanović M., Nikolić N., Lubich M., Orošnjak M.: Lubricating Oils for Automotive Natural Gas Engines, Annals of Faculty Engineering Hunedoara - International Journal of Engineering, 2018, Vol. 16, No. 1, pp. 153-157, ISSN 1584-2665
() Research published in the scientific journal
Orošnjak M., Jocanović M., Karanović V., Vekić A., Medić N.: Transformation from mass production to mass customization in SCM: Obstacles and advantages, Acta Technica Corviniensis, 2017, Vol. 10, No. 1, pp. 29-33, ISSN 2067-3809, UDK: http://acta.fih.upt.ro/pdf/2017-1/ACTA-2017-1-03
() Research published in the scientific journal
Jocanović M., Karanović V., Knežević D.: Application of Gear Oils in Food Processing Industry, Acta Technica Corviniensis, 2014, Vol. 1, No. 7, pp. 171-174, ISSN 2067-3809
() Report from the meeting of the national importance printed in its entirety
V. Savić, M. Tankosić, D.Knežević, M. Jocanović; Analiza rešenja i snage agregata hidrauličkog sistema presa sa promenjivim režimom kretanja klipa glavnog cilindra, DEMI 2000, str. 227 – 231, Mašinski fakultet u Banja Luci (2000); BiH , UDK 621+621.3(082), ISBN 86-7392-012-4
() Report from the meeting of the national importance printed in its entirety
D.Knežević, V. Savić, M. Tankosić, M. Jocanović, M.Kraišnik; TEORIJSKI ASPEKT DEKOMPRESIJE ULJA U HIDRAULIČKIM CILINDRIMA, DEMI 2001, str. 345– 350, Banja Luka (2001); BiH
() Report from the meeting of the national importance printed in its entirety
D.Knežević, V. Savić, M. Tankosić, M. Jocanović, M.Kraišnik; Elastična svojstva mineralnih ulja za hidrauličke sisteme – Dekompresija ulja u cilindrima hidrauličkih presa, DEMI 2002, str. 205 – 211, Banja Luka (2002); BiH, UDK 621.3(082), ISBN 99938-623-2-0
() Report from the meeting of the national importance printed in its entirety
V. Savić, M. Jocanović, D.Knežević; Model proračuna karakteristika pumpe dvolinijskog sistema za podmazivanje, Međunarodna konferencija, FTN – Institut za industrijsko inženjerstvo, str. 62 – 68, Vrnjačka Banja (2002), UDK 658.5, ISBN 182503943
() Report from the meeting of the national importance printed in its entirety
V. Savić, M. Tankosić, M. Jocanović; Pristup analizi stepena degradacije mineralnih hidrauličkih ulja, 29. naučno stručni skup sa međunarodnim učešćem, str. 95–100, Vrnjačka Banja (19-21.maj 2004), UDK 625.5/.6(082), ISBN 86-80587-31-1
() Report from the meeting of the national importance printed in its entirety
M.Jocanović; V.Karanović: PRILOG ISTRAŽIVANJU KRITERIJUMA ZA DEFINISANJE POTREBNOG STEPENA ČISTOĆE HIDRA-ULIČKIH FLUIDA U SKLADU SA ZAHTEVIMA HIDRAULIČKIH KOMPONENTI I SISTEMA, DEMI 2007, Banja Luka: Mašinski fakultet Banja Luka, 25/26 maj, 2007, str. 869 - 876, UDK: 621.5(082), ISBN 978-99938-39-15-6.
() Report from the meeting of the national importance printed in its entirety
V. Savić, M. Jocanović, D.Knežević, M. Kraišnik; Različiti pristupi izboru zazora unutar hidrauličkih komponenti, JUMO-Konferencija, Vol. 26, str. 73 – 79, Novi Sad (22-24.maj 2002), UDK 621 – 772(082)
() Report from the meeting of the national importance printed in its entirety
M.Jocanović, V.Karanović: OSETLJIVOST HIDRAULIČNIH KOMPONENATA NA KONTAMINANTE, DEMI 2009, str. 775 – 780, Banja Luka: Mašinski fakultet Banja Luka, 28-29 Maj, 2009, ISBN 978-99938-39-23-1.
() Report from the meeting of the national importance printed in its entirety
M.Jocanović, V. Savić, V. Karanović, M. Kraišnik: Proračun promene broja čestica u uljnoj masi hidrauličnog sistema kod izdvajanja sekundarnim filterom, Kongres sa međunarodnim učešćem o hidropneumatskoj automatizaciji - HIPNEF 2008, Niš: Mašinski fakultet Niš, SMEITS - Beograd, 15-17 Oktobar, 2008, str. 49- 54, UDK: 621.5/.6(082), 681.5 (082), ISBN 978-86-80587-87-5.
() Report from the meeting of the national importance printed in its entirety
V.Savić, M.Jocanović, V.Karanović, A.Ivanišević, S.Mitrović: Tehno-ekonomski parametri za optimizaciju konstrukcije "ANTI FROST" sistema za zaštitu voćki od mraza, DEMI 2009, str. 45 – 50, Banja Luka: Mašinski fakultet banja Luka, 28-29 Maj, 2009. ISBN 978-99938-39-23-1.
() Report from the meeting of the national importance printed in its entirety
V.Karanović, V.Savić, O.Kovač, M.Jocanović, D.Knežević: ISTRAŽIVANJE UTICAJA TEMPERATURE NA PAD PRITISKA KOD PROTICANJA ULJA KROZ RAVNE CEVOVODE HIDRAULIČNOG SISTEMA PRI KONSTANTNOM PRITISKU, Kongres sa međunarodnim učešćem o hidropneumatskoj automatizaciji - HIPNEF 2008, Niš: Mašinski fakultet univerziteta u Nišu, SMEITS - Beograd, 15/17 Oktobar, 2008, str. 43- 48, UDK: 621.5/.6(082), 681.5 (082), ISBN 978-86-80587-87-5.
() Report from the meeting of the national importance printed in its entirety
V. Savić, M. Jocanović, D.Jurišić, D.Selinić; PROGRAM EKSPLOATACIONOG ISPITIVANJA MOTORNIH ULJA U AUTOBUSIMA JGSP NOVI SAD, YUTRIB’05, IX Jugoslovenska konferencija o Tribologiji, str. 733-737, 15-18. jun 2005, Srpsko tribološko društvo, Kragujevac, SCG, ISBN 86-80581-78-X
() Report from the meeting of the national importance printed in its entirety
Savić V., Šešlija D., Stankovski S., Jocanović M.: Tendencije u razvoju hidrauličkih i pneumatskih automatizovanih sistema, 11. International Scientific Conference on Industrial Systems - IS, Novi Sad: Fakultet tehničkih nauka - Naučno stručna konferencija Industrijski sistemi IS'99, 28 Oktobar, 1999, pp. 25-25, UDK: 62.002;658.51
() Report from the meeting of the national importance printed in extracts
V.Savić, Z. Keserović, M. Jocanović, V. Karanović,: POLAZNI PRISTUP OPTIMIRANJU ANTIFROST SISTEMA U VOĆARSTVU, 13. Kongres voćara i vinogradara Srbije, Novi Sad: Poljoprivredni fakultet Novi Sad, 27-30 Oktobar, 2008, str. 49.
() Report from the meeting of the national importance printed in extracts
V. Savić, M. Jocanović, M. Kraišnik; Novi pristupi u određivanju potrebne čistoće hidrauličkih fluida, Jugoslovensko društvo za tribologiju - 8 th International Tribology Conference, str. 198 – 201, Beograd (8-10.oktobar 2003.), UDK 621.89(82), ISBN 86-80581-57-7
() Defended Doctoral dissertation
M. Jocanović; PRILAZ ISTRAŽIVANJU I DEFINISANJU MODELA ZA PRORAČUN PROTICANJA ČVRSTIH ČESTICA SA ULJNOM MASOM KROZ ZAZORE U FUNKCIJI KONSTRUKCIONO RADNIH PARAMETARA HIDRAULIČNIH KOMPONENATA, Doktorska disertacija
() Defended Magister thesis
M.Jocanović; RAZVOJ INTEGRALNOG MODELA ZA IZBOR I DIJAGNOSTIKU MINERALNIH HIDRAULIČKIH ULJA; Magistrarski rad iz oblasti problematike vezane za izbor i dijagnostikovanje mineralnih hidrauličkih ulja u hidrauličkim sistemima
() Significantly improved existing product or technology
Jocanović M., Karanović V., Stankovski S.: Konstrukcija hidrauličnog diferencijaklnog pojačivača pritiska za pogon hidraulične prese FC-100T, 2017
() Prototype, new methods, software, standardized and certified instrument
Lukić D., Jocanović M., Milošević M., Karanović V., Vukman J., Koledin S.: Programsko rešenje za unapređenje tehničke pripreme proizvodnje hidrauličnih cilindara, 2018
