() Research published in the prominent international journal
Vučković M., Popović V., Oros Đ., Vasić V., Marčetić D.: Low Voltage Induction Motor Traction Drive Self-Commissioning Technique with the Advanced Measured Signal Processing Procedure, Energies, 2021, Vol. 14, No. 6, pp. 1-18, ISSN 1996-1073
() Research published in the prominent international journal
Despotović Ž., Reljić D., Vasić V., Oros Đ.: Power Transfer Analysis of an Asymmetric Wireless Transmission System Using the Scattering Parameters, Electronics (Basel), 2021, Vol. 10, No. 8, pp. 1-16, ISSN 2079-9292
() Research published in the prominent international journal
Oros Đ., Čongradac V., Vasić V., Kulić F.: Effects of introducing the improved energy management system in the urgent care center of the clinical center of Vojvodina,, Thermal Science, 2018, ISSN 0354-9836, UDK: 621
() Research published in the prominent international journal
Popović V., Oros Đ., Vasić V., Marčetić D.: Tuning the rotor time constant parameter of IM using the minimum order recursive linear Least square estimator, IET Electric Power Applications, 2018, ISSN 1751-8660 doi:10.1049/iet-epa.2018.5459
() Research published in the international journal
Reljić D., Jerkan D., Marčetić D., Oros Đ.: Broken Bar Fault Detection in IM Operating Under No-Load Condition, Advances in Electrical and Computer Engineering, 2016, Vol. 16, No 4, pp. 63-70, ISSN 1582–7445
() Research published in the international journal
Vasić V., Marčetić D., Oros Đ.: Prediction of Local Instabilities in Open-loop Induction Motor Drives, COMPEL - The international journal for computation and mathematics in electrical engineering, 2010, Vol. 29, No 3, ISSN 0332-1649
() Research published in the international journal
Oros Đ., Vasić V., Marčetić D., Kulić F.: Influence of parameters detuning on induction motor NFO shaft-sensorless scheme, Journal of Advances in Electrical and Computer Engineering, 2010, Vol. 10, No 4, pp. 121-124, ISSN 1582-7445
() Research published in the international journal
Đura V. Oros, Veran V. Vasić, Darko P. Marčetić: NFO sensorless induction motor drive with on-line stator resistance parameter update, Electric Power Components and Systems, 2008, Vol. 36, No. 12, str. 1318- 1336, ISSN 1532-5008.
() Research published in the international journal
P. Vas, E. Levi, Đ. Oros, R. Jevremović: Capacitor braking of double-cage induction motors, Electric Power Systems Research, 1997, Vol. 40, No. 3, str. 161- 166, ISSN 0378-7796.
() Research published in the journal of the international importance verified by the special resolution
Skoko S., Marčetić D., Vasić V., Oros Đ.: Observer based parallel IM speed and parameter estimation, Serbian Journal of Electrical Engineering, 2014, Vol. 11, No 3, pp. 501-521, ISSN 1451-4869, UDK: 621.313.333-253:519.853
() Report from the international meeting printed in its entirety
Popović V., Oros Đ., Marčetić D.: MAPT strategy of IM Including Iron Loss Phenomena, IEEE Xplore, 2020, Vol. 1, No. 1, pp. 1-5, 12. International Symposium on Industrial Electronics (INDEL), Banja Luka: Faculty of Electrical Engineering University of Banja Luka, 1-3 November, 2018, pp. 1-5, ISBN 978-1-7281-9863-7
() Report from the international meeting printed in its entirety
Popović V., Vujkov B., Vučković M., Vasić V., Marčetić D., Oros Đ.: MAPT strategy for IPMSM with parameter sensitivity analysis, IEEE Xplore, 2020, Vol. 1, No. 1, pp. 1-5, 12. International Symposium on Industrial Electronics (INDEL), Banja Luka: Faculty of Electrical Engineering University of Banja Luka, 1-3 November, 2018, pp. 1-5, ISBN 978-1-7281-9863-7
() Report from the international meeting printed in its entirety
Popović V., Oros Đ., Marčetić D., Matić P.: Convergence and stability analysis of IM rotor time constant estimators based on MRAS scheme, 19. International Symposium POWER ELECTRONICS Ee, Novi Sad: Power electronics society, Novi Sad, 19-21 Oktobar, 2017, pp. 1-6, ISBN 978-86-7892-980-9
() Report from the international meeting printed in its entirety
Popović V., Gecić M., Todorović I., Oros Đ., Marčetić D.: Sensorless Control of Synchronous Reluctance Drive Based on Extended Back Electromotive Force Model, 11. INDEL, Banja Luka: Elektrotehni;ki fakultet Banja Luka, 3-5 Novembar, 2016, pp. 1-6, ISBN 978-1-5090-2329-5
() Report from the international meeting printed in its entirety
Milićević D., Dumnić B., Popadić B., Katić V., Oros Đ.: Overview of the six phase VSI control techniques for the dual three-phase induction machine drive, 26. International Exhibition and Conference on Power Electronics, Intelligent Motion and Power Quality, Nirnberg: VDE, 19-20 Maj, 2015, pp. 1-8, ISBN 978-3-8007-3924-0
() Report from the international meeting printed in its entirety
Popović V., Gecić M., Oros Đ., Marčetić D.: Full order IPMSM observer using extended back-EMF in stationary reference frame, 18. International Symposium on Power Electronics – Ee, Novi Sad: Power Electronics Society, Novi Sad; Electrotechnical Institute, Nikola Tesla, Belgrade; Faculty of Technical Sciences, Novi Sad, 28-30 Oktobar, 2015, pp. 1-6, ISBN 978-86-7892-757-7
() Report from the international meeting printed in its entirety
Dumnić B., Popadić B., Milićević D., Katić V., Oros Đ.: Speed-sensorless vector control of an wind turbine induction generator using artificial neural network, 16. International Power Electronics and Motion Control Conference EPE-PEMC, Antalija, 21-24 Septembar, 2014, pp. 458-464, ISBN 978-1-4799-2062-4
() Report from the international meeting printed in its entirety
Popović V., Gecić M., Vasić V., Oros Đ., Marčetić D.: Evaluation of Luenberger Observer Based Sensorless Method for IM, 10. INDEL, Banja Luka: Elektrotehnički fakultet, Banja Luka, 6-8 Novembar, 2014, pp. 128-133, ISBN 978-99955-46-22-9
() Report from the international meeting printed in its entirety
Reljić D., Matić D., Jerkan D., Oros Đ., Vasić V.: The Estimation of Iron Losses in a Non-Oriented Electrical Steel Sheet Based on the Artificial Neural Network and the Genetic Algorithm Approaches, 3. IEEE International Energy Conference (ENERGYCON), Cavtat: IEEE, 13-16 Maj, 2014, pp. 51-57, ISBN 978-1-4799-2448-6
() Report from the international meeting printed in its entirety
Matić D., Kanović Ž., Reljić D., Kulić F., Oros Đ., Vasić V.: Broken Bar Detection Using Current Analysis - A Case Study, 9. IEEE International Symposium on Diagnostics for Electrical Machines, Power Electronics & Drives, Valencia: IEEE, 27-30 Avgust, 2013, pp. 645-649, ISBN 978-1-4799-0025-1
() Report from the international meeting printed in its entirety
Reljić D., Tomić J., Matić D., Oros Đ., Vasić V.: Iron losses evalution of an induction motor using virtual instrumentation, 17. International Symposium on Power Electronics – Ee, Novi Sad, 30-1 Oktobar, 2013, pp. 1-5, ISBN 978-86-7892-551-1
() Report from the international meeting printed in its entirety
Reljić D., Vasić V., Oros Đ.: Power factor correction and harmonics mitigation based on phase shifting approach, 15. International Power Electronics and Motion Control Conference, EPE-PEMC 2012 ECCE Europe, Novi Sad, Serbia, pp. DS3b.12-1 - 12-8, ISBN: 978-1-4673-1971-3, IEEE catalog number CFP 1234A-USB
() Report from the international meeting printed in its entirety
Dumnić B., Oros Đ., Milićević D., Matić D., Vasić V.: Vector Control of Induction Generator with Parallel Stator Resistance and Rotor Speed Estimation, 31. Power Electronics, Intelligent Motion, Power Quality PCIM, Nuremberg: Mesago PCIM Gmbh, 4-6 Maj, 2010, pp. 608-612, ISBN 978-3-8007-3229-6
() Research published in the leading journal of the national importance
Nikolić P., Bugarski V., Kulić F., Oros Đ.: The Practical Example of Connecting the Plant Processing Industry into a Single Supervisory and Control System, Journal on Processing and Energy in Agriculture, 2010, Vol. 14, No 2, pp. 109-111, ISSN 1821-4487, UDK: 631.55/56:620.92
() Research published in the leading journal of the national importance
Dumnić B., Popadić B., Milićević D., Katić V., Oros Đ.: Artificial Intelligence Based Vector Control of Induction Generator without Speed Sensor for Use in Wind Energy Conversion System, International Journal of Renewable Energy Research, 2015, Vol. 5, No 1, pp. 299-307, ISSN 1309-0127
() Research published in the leading journal of the national importance
Matić D., Kanović Ž., Bugarski V., Kulić F., Reljić D., Oros Đ., Vasić V.: Detection of the broken bar fault: A case study for a 3.2 MW induction motor , Journal on Processing and Energy in Agriculture, 2013, Vol. 17, No 3, pp. 134-137, ISSN 1821-4487
