() Research published in the top international journal
Živković A., Zeljković M., Tabaković S., Milojević Z.: Mathematical modeling and experimental testing of high-speed spindle behavior, International Journal of Advanced Manufacturing Technology, 2015, Vol. 77, No 5-8, pp. 1071-1086, ISSN 0268-3768, UDK: DOI: 10.1007/s00170-014-6
() Research published in the top international journal
Zeljković M., Gatalo R.: Experimental and Computer Aided Analysis of High-Speed Spindle Assembly behaviour, CIRP Annals - Manufacturing Technology, 1999, Vol. 48, No 1, pp. 325-328, ISSN 0007-8506
() Research published in the prominent international journal
Tabaković S., Zeljković M., Milojević Z.: Automated Acquisition of Proximal Femur Morphological Characteristics, Measurement Science Review, 2014, Vol. 14, No 5, pp. 2850-293, ISSN 1335-8871, UDK: 10.2478/msr-2014-0039
() Research published in the prominent international journal
Todić V., Zeljković M., Tepić J., Milošević M., Lukić D.: Techno-economic method for evaluation and selection of flexible manufacturing systems, Metalurgija, 2012, Vol. 51, No 3, pp. 349-353, ISSN 0543-5846
() Research published in the prominent international journal
Gatalo R., Hodolič J., Zeljković M., Milošević V., Konjović Z.: Achievements in the developoment and future development of SAPOR-S systems for automatic programming of NC Lathes , Robotics and Computer-integrated Manufacturing, 1988, Vol. 4, No 1/2, pp. 91-102, ISSN 0736-5845
() Research published in the prominent international journal
Gatalo R., Rekecki J., Hodolič J., Borojev Lj., Zeljković M., Milošević V., Konjović Z., Malbaški D.: Automatic design of the technological process for NC lathes by the use of SAPOR-S system, International Journal of Production Research, 1983, Vol. 21, No 2, pp. 197-213, ISSN 0020-7543
() Research published in the international journal
Živković A., Zeljković M., Mlađenović C., Tabaković S., Milojević Z., Hadžistević M.: A study of thermal behavior of the machine tool spindle, Thermal Science, 2018, ISSN 0354-9836
() Research published in the international journal
Lanc Z., Štrbac B., Zeljković M., Živković A., Hadžistević M.: Emissivity of Aluminium Alloy Using Infrared Thermographic Technique, Materiali in Tehnologije, 2018, Vol. 52, No 3, pp. 323-327, ISSN 1580-2949
() Research published in the international journal
Blanuša V., Zeljković M., Milisavljević B., Savić B.: Mathematical modeling of thermal behaviour of cylindrical roller bearing for towed railway vehicles, Tehnicki vjesnik - Technical Gazette, 2017, Vol. 24, No 3, pp. 211-217, ISSN 1330-3651
() Research published in the international journal
Tabaković S., Grujić J., Zeljković M., Blagojević Z., Radojević B., Popović Z., Stanojević V.: Computer and experimental analysis of the stress state of the cement hip joint endoprosthesis body, Vojnosanitetski pregled, 2014, ISSN 0042-8450, UDK: prihvaćen za objavljivanje 10.01.2014.
() Research published in the international journal
Tabaković S., Zeljković M., Gatalo R., Živković A.: Programme Suite for Conceptual Designing of Parallel Mechanism-Based Robots and Machine Tools, International Journal of Advanced Robotic Systems, 2013, Vol. 10, No 2013 (279), pp. 1-13, ISSN 1729-8806
() Research published in the international journal
Tabaković S., Zeljković M., Živković A.: General Parametric Model of The Body of The Total Hip Endoprosthesis, Acta Polytechnica Hungarica, 2013, Vol. 11, No 1, pp. 227-246, ISSN 1785-8860
() Research published in the international journal
Antić A., Petrović P., Zeljković M., Kosec B., Hodolič J.: The influence of tool wear on the chip-forming mechanism and tool vibrations, Materijali in tehnologije, 2012, Vol. 46, No 3, pp. 279-285, ISSN 1580-2949
() Research published in the international journal
Antić A., Zeljković M., Petrović P., Živković A., Hodolič J.: Experimental analysis and FEM modelling of a cutting tool vibrations, Strojarstvo: časopis za teoriju i praksu u strojarstvu, 2012, Vol. 54, No 2, pp. 117-125, ISSN 0562-1887
() Research published in the international journal
Čiča Đ., Zeljković M., Lakić-Globočki G., Sredanović B., Borojević S.: Modelling of Dynamical Behavior of a Spindle-Holder-Tool Assembly, Strojarstvo: časopis za teoriju i praksu u strojarstvu, 2012, Vol. 54, No 2, pp. 117-125, ISSN 0562-1887
() Research published in the journal of the international importance verified by the special resolution
Milojević Z., Vićević M., Zeljković M., Navalušić S.: Methodology of the bone tissue diagnostic images processing, Academic Journal of Manufacturing Engineering – AJME, 2012, Vol. 10, No 3, pp. 63-70, ISSN 1583-7904
() Research published in the journal of the international importance verified by the special resolution
Milojević Z., Navalušić S., Zeljković M., Vićević M., Beju L.: Haptic interaction program systems development as a part of virtual environment, Academic Journal of Manufacturing Engineering – AJME, 2011, Vol. 9, No 2/2011, pp. 61-66, ISSN 1583-7904
() Research published in the journal of the international importance verified by the special resolution
Tabaković S., Živković A., Grujić J., Zeljković M.: Using CAD/CAE software systems in the design process of modular, revision total hip endoprosthesis, Academic Journal of Manufacturing Engineering – AJME, 2011, Vol. 9, No 2/2011, pp. 97-102, ISSN 1583-7904
() Research published in the journal of the international importance verified by the special resolution
Tabaković S., Zeljković M., Gatalo R.: Analysis of Workspace of Machine Tools Based on Parallel Kinematics, Academic Journal of Manufacturing Engineering – AJME, 2010, pp. 88-96, ISSN 1583-7904
() Research published in the journal of the international importance verified by the special resolution
Živković A., Zeljković M., Tabaković S.: Matematical Model for the Roller Bearing Life Determination, Academic Journal of Manufacturing Engineering – AJME, 2010, Vol. 8, No 3/2010, pp. 108-115, ISSN 1583-7904
() Invited lectures from the international meeting printed in its entirety
Tabaković S., Zeljković M., Živanović S.: MACHINE TOOLS AND INDUSTRY 4.0 - TRENDS OF DEVELOPMENT, 4. International Scientific Conference "Conference on Mechanical Engineering Technologies and Applications" - COMETa, Jahorina: Mašinski fakultet Istočno Sarajevo, 27-30 Novembar, 2018, pp. 2-19, ISBN 978-99976-719-4
() Invited lectures from the international meeting printed in its entirety
Čiča Đ., Zeljković M., Lakić-Globočki G., Sredanović B., Borojević S.: Identification of contact parameters of spindle-holder-tool assembly using artification neural networks, 11. International Scientific Conference "Advanced Production Technologies" - MMA, Novi Sad: Fakultet tehničkih nauka, 20-21 Septembar, 2012, pp. 57-60, ISBN 978-86-7892-419-4
() Invited lectures from the international meeting printed in its entirety
Beju L., Zeljković M., Navalušić S.: Strategies for improving the agility level in the manufacturing bearing industry, 11. International Scientific Conference "Advanced Production Technologies" - MMA, Novi Sad: Fakultet tehničkih nauka, 20-21 Septembar, 2012, pp. 101-104, ISBN 978-86-7892-419-4
() Invited lectures from the international meeting printed in its entirety
Navalušić S., Milojević Z., Zeljković M.: Concept of the virtual manufacturing , 6. International Conference of Advanced Manufacturing Technologies – ICAMaT, Kluž, 8-10 Oktobar, 2009, pp. 41-48, ISBN 2066-9445
() Report from the international meeting printed in its entirety
Mlađenović C., Košarac A., Zeljković M., Knežev M.: EXPERIMENTAL DEFINITION OF MACHINING SYSTEMS STABILITY LOBE DIAGRAM, 13. International Scientific Conference "Flexible Technologies" - MMA, Novi Sad: Faculty of Technical Sciences, 28-29 Septembar, 2018, pp. 95-98, ISBN 978-86-6022-094-5
() Report from the international meeting printed in its entirety
Knežev M., Tabaković S., Zeljković M., Štrbac B., Mlađenović C.: Analysis and verification of complex surfacess machining by three axis milling machine center , 13. International Scientific Conference "Flexible Technologies" - MMA, Novi Sad: Fakultet tehničkih nauka, 28-29 Septembar, 2018, pp. 83-86, ISBN 978-86-6022-094-5
() Report from the international meeting printed in its entirety
Antić A., Zeljković M., Krstanović L., Ungureanu N.: A Texture-based descriptors for real time tool condition monitoring , 13. International Scientific Conference "Flexible Technologies" - MMA, Novi Sad: Faculty of Technical Sciences, 28-29 Septembar, 2018, pp. 53-56, ISBN 978-86-6022-094-5
() Report from the international meeting printed in its entirety
Lanc Z., Zeljković M., Hadžistević M., Štrbac B., Živković A.: Determination of Emissivity of Steel Alloy Using infrared Thermographic Technique, 13. International Scientific Conference "Flexible Technologies" - MMA, Novi Sad: Faculty of Technical Sciences, 28-29 Septembar, 2018, pp. 87-90, ISBN 978-86-6022-094-5
() Report from the international meeting printed in its entirety
Živković A., Zeljković M., Rodić M., Mijušković M.: Computer and experimental determination of the hub unit life, 10. International Conference on Accomplishments in Electrical and Mechanical Engineering and Information Technology - DEMI, Banja Luka: Faculty of Mechanical Engineering, 26-28 Maj, 2011, pp. 937-942, ISBN 978-99938-39-23-1
() Report from the international meeting printed in its entirety
Tabaković S., Mlađenović C., Zeljković M., Gatalo R.: Analysis of kinematic characteristics of machine tools using a virtual model, 34. International Conference on Production Engineering, Niš: Faculty of Mechanical Engineering, 28-30 Septembar, 2011, pp. 113-116, ISBN 978-86-6055-019-6
() Report from the international meeting printed in its entirety
Čiča Đ., Zeljković M., Lakić-Globočki G., Sredanović B., Borojević S.: Modeling of dynamical behavior spindle - holder - tool assembly, 34. International Conference on Production Engineering, Niš: Faculty of Mechanical Engineering, 28-30 Septembar, 2011, pp. 117-120, ISBN 978-86-6055-019-6
() Report from the international meeting printed in its entirety
Milojević Z., Navalušić S., Zeljković M., Vićević M., Beju L.: EXAMPLES OF DEVELOPMENT OF PROGRAM SYSTEMS WITH HAPTIC INTERACTION, 5. International Conference on Manufacturing Science and Education - MSE, Sibiu, 2-5 Jun, 2011
() Monograph of the national importance, monographic edition,
Zeljković, M., Tabaković, S., Milojević, Z., Živković, A., Navalušić, S.: Savremeni prilazi u razvoju proizvoda specifične namene, Fakultet tehničkih nauka, edicija tehničke nauke - monografije, 66, Novi Sad, 2016, ISBN 987-86-7892-854-3
() Monograph of the national importance, monographic edition,
REKECKI, J., GATALO, R., ZELjKOVIĆ, M., BOROJEV, Lj., HODOLIČ, J.: Fleksibilni tehnološki sistemi za obradu rotacionih izradaka, knjiga I, Stanje, tendencije i podloge za razvoj, edicija NUMA - FTS, Institut za proizvodno mašinstvo, FTN, 177 str., Novi Sad, 1989.
() Monographic bibliographic publication
Beju, L., Navalušić, S., zeljković, M.: Lean Manufacturing, Faculty of Techical Sciences, 242 str., Novi Sad, 2017, ISBN 978-86-7892-990-8
() Monographic bibliographic publication
Beju L., Barb C., Navalušić S., Zeljković M.: Project Management, Novi Sad, University of Novi Sad, Faculty of Technical Science, 2015, ISBN 978-86-7892-768-3
() Monographic bibliographic publication
Zeljković M., Borojev Lj., Tabaković S., Antić A., Živković A.: Programiranje numerički upravljanih mašina alatki za obradu rezanjem, Fakultet tehničkih nauka, 2010, str. 1-197, ISBN 978-86-7892-329-6, UDK: 621.7/.9-52 (0.075.8)
() Monographic bibliographic publication
Zeljković M., Živković A.: Tehnologija obrade i obradni sistemi za struganje i brušenje, Temerin, FKL a.d., Fabrika kotrljajućih ležaja i kardana, 2011, str. 1-98, ISBN 978-86-906415-1-2, UDK: 621.941 (035)
() Research published in the leading journal of the national importance
Milojević Z., Tabaković S., Zeljković M., Živković A.: Free form shape modelling by hand movement in virtual environment, Machine Design, 2016, Vol. 8, No 4, pp. 165-170, ISSN 1821-1259
() Research published in the leading journal of the national importance
Čiča Đ., Zeljković M., Sredanović B., Borojević S.: Dynamic analysis of spindle-holder-tool assembly, Machine Design, 2016, Vol. 8, No 2, pp. 53-56, ISSN 1821-1259
() Research published in the leading journal of the national importance
Živanović S., Tabaković S., Zeljković M., Milojević Z.: Configuring a machine tool based on hybrid O-X glide mechanism, Machine Design, 2016, Vol. 8, No 4, pp. 141-148, ISSN 1821-1259
() Research published in the leading journal of the national importance
Živković A., Zeljković M., Tabaković S., Blanuša V.: The analysis of the static behavior of special roller bearings with forged outer ring, Journal for Technology of Plasticity, 2014, Vol. 39, No 1, pp. 39-48, ISSN 0354-3870, UDK: 621.7
() Research published in the leading journal of the national importance
Grujić J., Tabaković S., Zeljković M., Živković A., Vučinić Z., Đorđević A., Mandić N., Lujić N., Sekulić J.: Projektovanje specijalne endoproteze „Spacer“, Acta chirurgica Iugoslavica, 2013, pp. 109-115, ISSN 0354-950X, UDK: 616.72-089-77
() Research published in the leading journal of the national importance
Tabaković S., Zeljković M., Živković A., Movrin D., Grujić J.: Development of the endoprosthesis of the femur according to the characteristics of a specific patient with using modern methods for product design and rapid prototyping, Journal for Technology of Plasticity, 2012, Vol. 37, No 2, pp. 195-208, ISSN 0354-3870
() Research published in the leading journal of the national importance
Tabaković S., Zeljković M., Živković A., Movrin D., Grujić J.: Development of the endoprosthesis of the femur according to the characteristics of a specific patient with using modern methods for product design and rapid prototyping, Journal for Technology of Plasticity, 2012, Vol. 37, No 2, pp. 195-208, ISSN 0354-3870
() Research published in the leading journal of the national importance
Blanuša V., Zeljković M., Vilotić D., Tabaković S.: The specificity of punch presses programming, Journal for Technology of Plasticity, 2011, Vol. 36, No 2, pp. 121-135, ISSN 0354-3870
() Research published in the leading journal of the national importance
Antić A., Kovačević D., Zeljković M., Kosec B., Novak-Marcinčin J.: Wear level influence on chip segmentation and vibrations of the cutting tool, Materials and Geoenvironment, 2011, Vol. 58, No 1, pp. 15-28, ISSN 1408-7073
() Research published in the leading journal of the national importance
Antić A., Zeljković M., Novak-Marcinčin J.: Influence of Tool Wear and Chip Forming Mechanism on Tool Vibration, Journal of Manufacturing Engineering, 2011, Vol. 10, No 3, pp. 14-17, ISSN 1335-7972
() Research published in the leading journal of the national importance
Blanuša V., Zeljković M., Vilotić D., Tabaković S.: The specificity of punch presses programming, Journal for Technology of Plasticity, 2011, Vol. 36, No 2, pp. 121-135, ISSN 0354-3870
() Research published in the leading journal of the national importance
Tabaković S., Zeljković M., Gatalo R.: Analysis of Workspace of Machine Tools Based on Parallel Kinematics, Academic Journal of Manufacturing Engineering – AJME, 2010, Vol. 8, No 3/2010, pp. 88-96, ISSN 1583-7904
() Research published in the leading journal of the national importance
Milojević Z., Navalušić S., Zeljković M.: Approximate approach to the turning simulation, Academic Journal of Manufacturing Engineering – AJME, 2009, Vol. 7, No 2, pp. 65-70, ISSN 1583-7904
() Research published in the leading journal of the national importance
Navalušić S., Milojević Z., Zeljković M.: Concept of the virtual Manufacturing , Academic journal of manufacturing engineering, 2009, Vol. 7, No 4, pp. 103-110, ISSN 1583-7904
() Research published in the leading journal of the national importance
Tabaković S., Zeljković M., Gatalo R.: A contribution to workspace analysis of machine tools based on parallel mechanism , Journal of Machine Engineering, 2007, Vol. 7, No 1, pp. 80-90, ISSN 1895-7595
() Research published in the leading journal of the national importance
Zeljković M., Živković A., Borojev Lj.: Influence of the bearing configuration on the high-speed main spindle thermal behavior , Machine Engineering, 2005, Vol. 5, No 1-2, pp. 165-176, ISSN 1642-6568
() Research published in the leading journal of the national importance
Zeljković M., Zeljković Ž., Navalušić S., Milojević Z.: Software Solution Development for the Grinding Wheel Profiling Cycle on the CNC Grinding Machine, Machine Engineering, 2004, Vol. 4, No 1-2, pp. 254-26, ISSN 1642-6568
() Research published in the leading journal of the national importance
GATALO, R., HODOLIČ, J., NAVALUŠIĆ, S., ZELJKOVIĆ, M.: An approach to modeling source data in systems for automatic design, Inžynieria maszyn, Nr 3, Vol. 2-3, Wroclaw, 1998, pp 41-56, ISSN 1426-708 X
() Research published in the leading journal of the national importance
Zeljković M., Gatalo R., Toma J.: Integral system for automated design and behavior prediction of machine tool spindle assembly , Inžynieria maszyn, 1998, No 3, pp. 163-184, ISSN 1426-708X
() Research published in the leading journal of the national importance
Milojević Z., Tabaković S., Zeljković M., Živković A., Navalušić S.: Methodology of Knee Bones Models 3D Printing Based on CT Series of Images, Machine Design, 2017, Vol. 9, No 2, pp. 69-72, ISSN 1821-1259
() Invited lectures from the meeting of the national importance printed in its entirety
Zeljković M., Navalušić S., Todić V., Tabaković S., Milojević Z., Antić A., Živković A., Gerić K., Vićević M., Lukić D., Beju L., Mlađenović C., Blanuša V., Bojanić M., Jovičić G., Vukman J.: Savremeni prilazi u razvoju specijalnih rešenja uležištenja u mašinstvu i medicinskoj protetici, 38. Jupiter konferencija, Beograd: Mašinski fakultet-Beograd, 15-16 Maj, 2012, pp. 16-34, ISBN 978-86-7083-757-7
() Invited lectures from the meeting of the national importance printed in its entirety
Gatalo R., Zeljković M., Borojev Lj., Tabaković S.: Razvoj fleksibilnih tehnoloških sistema za obradu skidanjem materijala , 32. Savetovanje proizvodnog mašinstva Srbije sa međunarodnim učešćem, Novi Sad: Fakultet tehničkih nauka, Novi Sad, 18-20 Septembar, 2008, pp. 313-332, ISBN 978-86-7892-131-5
() New laboratory facilty, new experimental facilty, new technological procedure
Živković A., Zeljković M., Rodić M., Mijušković M., Borojev Lj., Tabaković S.: Opitni uređaj za određivanje veka integrisanog ležaja točka, Korisnik A.D. „FKL“ temerin, Projekat TR 14048, iz oblasti tehnološkog razvoja pod nazivom: Istraživanje i razvoj kotrljajnih ležajnih sklopova i njihovih komponenti, 2011
() Prototype, new methods, software, standardized and certified instrument
Tabaković S., Zeljković M., Milojević Z., Živković A.: Programski sistem za automatizovanu akviziciju morfoloških karakteristika proksimalnog segmenta femura, 2013
() Prototype, new methods, software, standardized and certified instrument
Milojević Z., Navalušić S., Zeljković M., Tabaković S., Vićević M., Živković A.: Programsko rešenje za simulaciju procesa višeosne obrade zasnovano na tri-deksel modelu, 2013
() Prototype, new methods, software, standardized and certified instrument
Živković A., Zeljković M., Tabaković S.: Programsko rešenje za analizu ponašanja kugličnih ležaja, 2013
() Prototype, new methods, software, standardized and certified instrument
Milojević Z., Navalušić S., Zeljković M., Tabaković S.: Programsko rešenje za simulaciju i verifikaciju obrade glodanjem i struganjem Korisnik: A.D. "FKL" Temerin Projekat: TR 14048, iz oblasti tehnološkog razvoja pod nazivom: Istraživanje i razvoj kotrljajnih ležajnih sklopova i njihovih komponenti, 2010
() Prototype, new methods, software, standardized and certified instrument
GATALO, R., REKECKI, J., HODOLIČ, J, BOROJEV, Lj., ZELjKOVIĆ, M., MILOŠEVIĆ, V., KONjOVIĆ, Z., MALBAŠKI, S.: SAPOR-S programski sistem za automatizovano programiranje NU mašina alatki za obradu struganjem, FTN – Institut za proizvodno mašinstvo, Novi Sad, 1973-1980. (novi softver), (rezultati razvoja objavljeni u više radova), ( -Softver sadrži preko 30.000 linija FORTRAN-skog programskog koda. Razvoj softverskog rešenja finansirala PZNR Vojvodine)
() Realized patent, breed, sort or race, architectural, civil and urban original work
Tabaković S., Zeljković M., Mlađenović C., Gatalo R.: Uređaj za manipulaciju radnim predmetima ili alatima kod mašina alatki i industrijskih manipulatora, Beograd, Zavod za intelektualnu svojinu, Glasnik intelektualne svojine, 2012, UDK: Broj patenta RS20121243
() Basic textbook for the course
Tabaković, S., Zeljković,M.:Virtuelna realnost i virtuelni prototip u mašinstvu, Fakultet tehničkih nauka, edicija tehničke nauke - udžbenici, 703, 184 str., Novi Sad, 2018, ISBN 978-86-6022-046-4
() Additional textbook for the course
Zeljković, M., Tabaković, S., Živković, A., Živanović, S., Mlađenović, C., Knežev, M.: Osnove CAD/CAE/CAM tehnologija, Fakultet tehničkih nauka, edicija tehničke nauke - udžbenici, 747, 284 str., Novi Sad, 2018, ISBN 978-86-6022-120-1
() Additional textbook for the course
Zeljković, M., Tabaković, S., Antić, A.: Programiranje numerički upravljanih obradnih sistema, Fakultet tehničkih nauka, edicija tehničke nauke - udžbenici, 552, 262 str., Novi Sad, 2015, ISBN 978-86-7892-785-0
() Additional textbook for the course
Zeljković M., Tabaković S., Antić A.: Programiranje numerički upravljanih obradnih sistema, Fakultet tehničkih nauka, edicija tehničke nauke - udžbenici, 405, Novi Sad, 2013, str. 257, ISBN 978-86-7892-523-8
() Monograph of the national importance, monographic edition,
GATALO, R., REKECKI, J., ZELjKOVIĆ, M., BOROJEV, Lj., HODOLIČ, J.: Fleksibilni tehnološki sistemi za obradu rotacionih izradaka, knjiga II, Osnovne komponente za obradu i njihovo komponovanje u strukture višeg nivoa, edicija NUMA - FTS, Institut za proizvodno mašinstvo, FTN, 266 str., Novi Sad, 1989.
() Monograph of the national importance, monographic edition,
HODOLIČ, J., BOROJEV, Lj., REKECKI, J., GATALO, R., ZELjKOVIĆ, M.: Fleksibilni tehnološki sistemi za obradu rotacionih izradaka, knjiga III, Manipulacioni i merno-kontrolni sistemi, edicija NUMA - FTS, Institut za proizvodno mašinstvo, FTN, 263 str., Novi Sad, 1989
() Basic textbook for the course
GATALO, R., BOROJEV, Lj., ZELjKOVIĆ, M.: Proračun glavnih karakteristika mašina alatki za obradu rezanjem, udžbenik, FTN, 410 str., Novi Sad, 1992.
() Significantly improved existing product or technology
REKECKI, J., JANOŠI, J., GATALO, R., BRAUHLER, J., NAĐABONjI, G., ZELjKOVIĆ, M., BOROJEV, Lj., HODOLIČ, J.: SISTEM STRUGOVA - Koncepcija razvoja i konstrukciona rešenja familije horizontalnih strugova za oblast prečnika obrade od 450 do 2000 [mm], elaborat, (rađeno za potrebe FAMIL “POTISJE” iz Ade), Institut za proizvodno mašinstvo, FTN, 500 str., Novi Sad, 1982.
() Prototype, new methods, software, standardized and certified instrument
GATALO, R., ZELjKOVIĆ, M., REKECKI, J., BOROJEV, Lj., MILOŠEVIĆ, V., KONjOVIĆ, Z.: SAPOR-P (VRETEN) programski sistem za automatizovano modeliranje i proračun aksijalnih struktura, Institut za proizvodno mašinstvo FTN, Novi Sad, 1975-1985. (novi softver), (rezultati razvoja objavljeni u više radova), ( Softver sadrži preko 8.000 linija FORTRAN-skog programskog koda. (Razvoj softverskog rešenja finansirala PZNR Vojvodine tokom niza godina)
() Report from the international meeting printed in its entirety
ZELJKOVIĆ, M., ŽIVKOVIĆ, A., BOROJEV, LJ., NAVALUŠIĆ, S.: The Application of CAE for High Speed Main Spindle Assembly Analysis, The 5th International Conference on Advanced Manufacturing Technologies - ICAMaT 2007, Sibiu, Romania: Academy of Technical Sciences of Romania, 2007, str. 77- 84, ISBN 1843-3162.
() Report from the international meeting printed in its entirety
MILISAVLJEVIĆ. B., ZELJKOVIĆ, M., GATALO, R.: The nonlinear model of a chatter and bifurcation, Proceedings of the 5th engineering systems design and analysis conference - ESDA – ASME 2000, PD. Vol. 82, New York, 2000, pp 391 – 398
